• Happy holidays, folks! Thanks to each and every one of you for being part of the Tom's Hardware community!

no video after driver install evga gtx 760

glasshalffull

Distinguished
Apr 21, 2010
210
0
18,680
i just replaced my gpu and power source with an EVGA gtx 760 superclocked and a corsair hx650

when i first started it up without any drivers installed, i got picture...then when i went to do a clean install of all of the drivers, software and nvidia experience, it rebooted and now I can't get any video.

updated bios before install, removed all previous nvidia software from the replaced gpu before replacing with new equipment

tried safe mode but can't get the screen to show, so not sure if it's in safe mode

tried switching from dvi-i to dvi-d....didn't fix

what could be the problem and how do i fix?
 


there is no video at all so i can't see any of what you asked about.

cannot get to safe mode either...no video

just took out the gpu and plugged it back in and started it up again and still no video at all
 
i just added the corsair hx650 power supply

this is my build with the new corsair psu and the 760.

dell XPS
Model Number
X8700-1257BLK
Operating System
Microsoft Windows 7 Home Premium (64-bit)
MOTHERBOARD Intel z87
CPU Core i7 CPU Speed 4770 (3.4GHz)
CPU Socket
LGA 1150
Total Memory
16GB Memory Speed DDR3-1600
500GB SSD (os runs on this)
2nd HD Capacity 1TB 7,200 RPM

GPU Type
(OLD) NVIDIA GeForce GT 635 (NEW)EVGA GTX 760 2GB superclocked
Video Memory
1GB

PORTS AND CONNECTORS
Ports and Connectors
1 x DisplayPort; 6 x USB 3.0; 4 x USB 2.0; 1 x HDMI; 1 x RJ-45 Network; 1 x Front Microphone; 1 x Front Head
Power Supply
(OLD) 460 watt (NEW)CORSAIR HX650 Watt
 
i thought i motherboard swap was too early to do....

I reinstalled the old video card, removed nvidia software, reinstalled gtx 760 and installed drivers and everything is running properly now and back to normal