no video after rebuild

[bigdog666]

Need advice on trouble shooting
Mobo
Gygabyte
gm-880gm-usb3
Cpu
Amd 8350
Video card
Gygabyte
Hd6870 oc
Ram
Kingston hyperx at 1600 4x4gb
Drive
Kingston hyperx 120g ssd
Power
Thermaltake 750 w
Cooler
H80i

Build is 2 years old
Just installed it all in a new case
Now when i turn it on
It powers up but thats where it stops
Fans and pump turn like normal
But no video
No beeps from the mobo speaker

Have tried hdmi and dvi with the video card in and out
No change
Tried all ram individualy
No change
Tried a new sata cable
In all the sata ports
No change
Checked and rechecked all connections
No obvious problems
Even tried a start up without the drive
No change
Not sure what else i can do

 

[alexoiu]

Try starting the board outside the case, see if the same.
If starting the board, only CPU and CPU fan installed, still no beeps?

 

[bigdog666]

So i have done the breadboard test
Still nothing
No beeps at all
Is there anything alse i can do before taking it to a shop

 

[alexoiu]

If the CPU fan does spin and no beeps, then it's either a board or CPU issue. Try re-seating the CPU.

 

[bigdog666]

I just reseated the cpu
And tried a start up
No change
No beeps at all
Fan comes on full speed than drops rpms to a slower speed and stays there
Still just cpu and fan hooked up

 

[alexoiu]

If there's an internal speaker connected and no beeps, I'd RMA both motherboard and CPU.

 

[bigdog666]

so its alive...
Just realized how easy it is to forget it wont post with a wireless dongle.
Plug in a hardwired keyboard and away we go.
Always something stupid
Thanks for the help

 

[alexoiu]

Interesting, though.