No video input problem.

[trivium111]

I recently got the "no video input" problem. Idk what happened it was working fi ne that day before and then today it says no video input. I think it might be my grapcis card or ram. This used to happen before and i cleared CMOS and it worked again but i cleared CMOS and it still doesnt work.

My specs:
galaxy 9600GT, i also have a nvidia 7200GS
430W psu
mobo: M2N-MX SE
ram: 2 X 1gb sticks, one is apacer and one is kingston

 

[trivium111]

OK just tested some stuff.

7200GS with 1GB of ram worked fine, except the graphics were all blueish, dont know why, never happened before. The 7200 is dodgy (dont not screw in as the end of the metal plug-in thing is bent.
After about a minute they returned to normal colours, could just be drivers or something.

Galaxy 9600GT with 1GB of ram worked perfect, although when i pressed on there were two short beeps about 1s apart but that could be because i only had a mouse installed and no keyboard.

With both video cards 2GB of ram didnt work. THe one that is in their is the kingston one, do you think i should swap them round just to see if the apacer isnt working? Or should i buy another kingston?