nothing works on GTX660

[Intars]

hi,
all games work only on low settings and i have problems with fps it's never get higher than 30fps in whatever settings i use in games (BF4 and NFS Rivals). and in heaven dx11 benchmark my score was FPS:15.4, Scores:388, Min FPS:7.9, Max FPS:35.8 and in furmark avarage was 15fps

Settings in heaven dx11 benchmark

Render: direct3d11
Mode: 1920x1080 fullscreen
Shaders: high
Textures: high
Filter: trilinear
Anisotropy: disabled
Occlusion:enabled
Refraction:enabled
Volumetric:enabled
Tessellation: disabled

My hardwar:

Fx - 6300 oc to 4,5Mhz
Zotac GTX 660 2Gb
8GB Ram
Mobo Asus M5A99FX pro r2.0


Is this fps are normal or not? I cant play any game. what i should do? please help.


i have just changed GPU because last one was overheating. but i make clear windows instalation and i have all newest drivers. adn msi afterburner shows that tdp all the time in 343%.

 

[Onus]

You installed the latest drivers for your card from www.nvidia.com?

 

[i7Baby]

I've got no idea what you mean by "adn msi afterburner shows that tdp all the time in 343%."


Have a read of what you've written before you post it. If it doesn't make sense then fix it.

Have a look at others game settings for BD4. Borrow another gpu and try it in your pc. Try your gpu in their pc. See if the problem is with your gpu or your pc.

Why haven't you listed your case, psu or OS? You should always list all your components. This could be due to ppoor psu voltages. Can you download and use HWInfo to show us the min and max readings for 12V, 5V and 3.3V rail voltages?

Can you show us the settings from Afterburner.

Have you got Windows switched to Performance?

 

[Intars]

You installed the latest drivers for your card from www.nvidia.com?

yes

 

[Intars]

I've got no idea what you mean by "adn msi afterburner shows that tdp all the time in 343%."


Have a read of what you've written before you post it. If it doesn't make sense then fix it.

Have a look at others game settings for BD4. Borrow another gpu and try it in your pc. Try your gpu in their pc. See if the problem is with your gpu or your pc.

Why haven't you listed your case, psu or OS? You should always list all your components. This could be due to ppoor psu voltages. Can you download and use HWInfo to show us the min and max readings for 12V, 5V and 3.3V rail voltages?

Can you show us the settings from Afterburner.

Have you got Windows switched to Performance?

i have windows 8.1 pro, Aerocool V3X Evil Black Edition Midi-Tower case and Fortron FSP500-60APN 500W (85Plus Bronze) Active PFC PSU.
yes its on high performance.

link to picture http://

link to picturehttp://

 

[i7Baby]

The voltages aren't too bad - a bit low if anything. But the power supply isn't even certified. You should get a 80plus certified psu.

That isn't Afterburner. Its a Zotac utility. Download and use Afterburner. It can also control fan speed and gpu voltage and clock speed and memory clock speed.