I'm running Windows 10 and have an external USB HDD (Two 2TB disks on RAID 1).
I have had some issues with it being recognized as RAW after I switched back to Windows from Linux but after a few reboots it was fine. Now it is an issue again and not going away.
I can still boot into Linux from a USB (so that's an option if needed to troubleshoot) but the drive would not mount on Linux either. I didn't troubleshoot it further on Linux after that.
When I run chkdsk in Windows I get the following output:
Any ideas on how I can recover the data here without reformatting?
Thank you.
I have had some issues with it being recognized as RAW after I switched back to Windows from Linux but after a few reboots it was fine. Now it is an issue again and not going away.
I can still boot into Linux from a USB (so that's an option if needed to troubleshoot) but the drive would not mount on Linux either. I didn't troubleshoot it further on Linux after that.
When I run chkdsk in Windows I get the following output:
Code:
The type of the file system is NTFS.
Access is denied.
Volume label is nb_external_ntfs.
WARNING! /F parameter not specified.
Running CHKDSK in read-only mode.
Stage 1: Examining basic file system structure ...
Progress: 0 of 4608 done; Stage: 0%; Total: 0%; ETA: 0:00:15
Progress: 4608 of 4608 done; Stage: 100%; Total: 30%; ETA: 0:00:11 .
4608 file records processed.
File verification completed.
Phase duration (File record verification): 100.18 milliseconds.
Progress: 0 of 0 done; Stage: 99%; Total: 32%; ETA: 0:00:11 ..
0 large file records processed.
Phase duration (Orphan file record recovery): 0.03 milliseconds.
Progress: 0 of 0 done; Stage: 99%; Total: 32%; ETA: 0:00:11 ...
0 bad file records processed.
Phase duration (Bad file record checking): 0.03 milliseconds.
Flags for file record segment 5 are incorrect.
Flags for file record segment 5 are incorrect.
Stage 2: Examining file name linkage ...
Incorrect information was detected in file record segment 5.
Progress: 4704 of 5092 done; Stage: 92%; Total: 80%; ETA: 0:00:03
Progress: 5092 of 5092 done; Stage: 100%; Total: 91%; ETA: 0:00:01 .
5092 index entries processed.
Index verification completed.
Phase duration (Index verification): 777.27 milliseconds.
Errors found. CHKDSK cannot continue in read-only mode.
Any ideas on how I can recover the data here without reformatting?
Thank you.