NZXT Outs New H-Series Cases

Status
Not open for further replies.

thundervore

Distinguished
Dec 13, 2011
1,030
1
19,460
I think they missed the point with the 400 and 200 model when it comes to the top panel. It would have been better if they left it the same at the 700 top panel and put the vents on the sides and back.

I'm waiting for the day these ITX cases only accept SFX PSUs as it will cut down on so much internal room the PSU area takes up.

Other than that, great job on including a CAM device to control the RGB!
 

Patrick_Bateman

Reputable
Nov 19, 2015
29
0
4,530
Almost had it; just invert the motherboard in mini-ITX so the graphics card is not pressed right up against the power supply and it'll be able to be ventilated well.
 

samer.forums

Notable
BANNED
Sep 30, 2017
662
0
1,160
pffft ... Bring back the 5.25 bays ..I am sick of cases manufacturers ignoring them recently. True we dont use DVD anymore , but the 5.25 bays can be used for very important front panel upgrades. The most important is the hotswap bays , and Fan controllers / card readers ...

And hey Nzext , if youinsist on not including 5.25 bays , then at least add a USB-C 3.1 Gen 2 front ports , SD Card reader , and make your 3.5 and 2.5 inch drive bays hotswap or permanently connected.
 

_amc27

Prominent
Oct 25, 2017
1
0
510
Anyone else having trouble accessing NZXT website? I wanted to ask if the h700i will support the 2 360 rads with fans at the same time.
 
Specs in your review regarding the H700i are inaccurate. This case does not support only 4 140mm fans as you indicate in the third paragraph. It supports five 140mm fans, which is what I thought and what is listed on the NZXT website.

Front: 3 x 120/2 x 140mm (3 Aer F120 Case Version included)
Top: 3 x 120/2 x 140mm
Rear: 1 x 120/1 x 140mm (1 Aer F140 Case Version included)
 

taldren76

Prominent
Nov 12, 2017
1
0
510
What power supply fits in the H200i? Does it require a SFF PSU or can it fit normal ATX ones? Is it standard ATX or does it require those ITX SFF PSUs?
 
Status
Not open for further replies.