[SOLVED] Oddity in gaming

[cjp1123]

Having extremely poor performance during gameplay and it seems to be only on one or two games, I am unsure why.
games i have had issues with include FFXV and Forza Horizon 4 (from Xbox app) Path of Exile and Diablo 3 (standard installation types) All 4 are on SSD.

I am running a MSI A320M Pro-M2 V2 (ms-7b84) with Ryzen 2600x (6 core 12 thread 3.6 / 4.2 turbo)
16 GB Crucial Balistix LT Sport DDR4-2666 RAM
PCI-E is supposed to be PCIE 3.0 but CPU-Z and GPU-z both say its running PCI-E x16 - 1.1 i updated the bios when i installed the computer; this only started happening recently though, after i updated to Radeon software 20.8

i had occasional issues with some games before that too though... For Horizon it seems that my computer shifts into "Stupid" it will say 100% GPU Usage for 12 FPS when normally I will see 60 fps (frame limited) @ 50-70% usage in 1080P

https://www.techpowerup.com/gpu-specs/powercolor-red-dragon-rx-570-oc-8-gb.b5840 That is my exact GPU (which according to CYRI defeats all requirements for Recommended on FH4 and the other games as well)

 

[Wolfshadw]

1. Where did you purchase your graphics card from?
2. What are the exact specifications (model number) of your power supply?

-Wolf sends

 

[cjp1123]

my system came from Micro center within the last year CPU Mobo PSU GPU RAM all since December
my new PSU ThermalTake 700 watt SMart series
PRODUCT INFORMATION

GENERAL SPECIFICATIONS
Cooling Fans
120mm Fan
Series
SMART Series
Wattage
700 Watts
Form Factor
ATX
Color
Black
Material
Steel
LED Color
None
ATi CrossFire
CrossFire Ready
NVIDIA SLI
SLI Ready
DRIVE/POWER CONNECTORS
Modular
Non-Modular
ATX Connector
20+4-pin
ATX 12V Connector
1 x 4+4-pin
Graphics Connector
1 x 6+2-pin
Molex Connector
5
SATA Connector
6
POWER SPECIFICATIONS
Rating
80 PLUS Certified
Energy Efficiency

80% Typical

Input Voltage
AC 100V/240V
Input Frequency Range
50Hz - 60Hz
Hold-up Time

16ms

+12V Rails
1
Combined +12V Rating
700 Watts


my old PSU was a 500watt VITAL FSP which i bought refurb Just installed the 700 about... a week ago issue was occurring before and after swap so i doubt its a PSU issue

curious as to why GPU-Z wont let me take a screenshot with the bubble overlay but either way shows my bus is PCIe x16 3.0 @ x16 1.1 shows GPU supports PCIe x16 3.0 but says running at PCIe x16 1.1

 

[Wolfshadw]

Ok. Ruling out the power supply, I'd say roll back your Radeon software to a previous version and see if that resolves anything.

-Wolf sends