[SOLVED] OLOy ddr4 3200 CL16 any chance to overclock to 3600?

[Deleted member 362816]

Never really messed with ram before and sure never have on this brand. I am curious if anyone thinks these are good enough of dies to be able to get to 3600 or if it's just a waste of time.

Specs:

Photo attached of info

2x16gb

z590i Aorus Ultra ITX

• DDR4 3200 (PC4 25600)
• Timing 16-20-20-38
• Cas Latency 16
• Voltage 1.35V

https://ibb.co/TcKZdKD

 

[Lutfij]

You could try and tighten the timings on the ram instead of going for a higher ram clock, if gaming is what you're after with your build. Also, make sure you're on the latest BIOS version before tackling any overclocking endeavor.

 

[Deleted member 362816]

You could try and tighten the timings on the ram instead of going for a higher ram clock, if gaming is what you're after with your build. Also, make sure you're on the latest BIOS version before tackling any overclocking endeavor.

What timings would you recommend to start with?

 

[Lutfij]

Try one parameter at a time, though leave the 16 alone. 20's could be set to 19 but test for stability.

 

[Deleted member 362816]

Try one parameter at a time, though leave the 16 alone. 20's could be set to 19 but test for stability.

Sounds good thank you.

 

[Lutfij]

If you don't have stability issues with 1.35v, try setting 19's to 18's. Test again and see if it's stable.