On Board Graphics won't disable and beep sounds

[IvanMuse007]

I put up a pc from spare parts I had from my other pc after upgrading and it runs normally
I installed Windows 7 on it
Problem is that I get beep sounds when I power it on
This is what I get:
[video="https://youtube.com/watch?v=igXWoSo-oe8&feature=youtu.be"][/video]

I'm using on board graphics and I can't get my gpu to display anything
Pc only uses On board Graphics whatever I do

 

[Leemon]

Hi IvanMuse007,

Make sure your display cable(s) is/are plugged into the GPU display port(s) and not the motherboard display port(s). Sometimes a new PC build won't boot using your dedicated card so you will need to use the on-board graphics and then install the dedicated card driver and then boot using your dedicated card.

 

[IvanMuse007]

Hi Leemon
I tried to plug my display cable to gpu but it didn't show anything on my display
I will try to install a driver and see if it helps
And btw here is my device manager window if it helps
http://postimg.org/image/5g7ofk49l/

 

[Leemon]

You're going to want to install the SM Bus Controller and PCI Simple Communications Controller drivers. Go to your motherboards website and find your motherboard and download and install all of the drivers for your motherboard. Once that is done install the GPU driver and try again.

 

[Leemon]

Basically, anything with that yellow symbol next to it in Device Manager needs to be installed 😉

 

[IvanMuse007]

I know...

 

[IvanMuse007]

I installed the driver for gpu and it still doesnt recognise it