2600x not overclocked
zotac 1060 6gig
asrock ab350m
Ballistix 2400 2x8 kit
The system will freeze after about 40min of use if I reset right away it will last only 10ish leave off for an hr or so I get my 40 min again. (mouse does not move keyboard no input screen stays on the image it was on when freezing no blue screen or self rebooting)
When trouble shooting the system will not boot into windows with only a single stick of ram no matter which stick I use and if both sticks are in they have to be in the right order to boot (I can not trade which slot the sticks are in while still staying in the primary slots and it work)
I am using the proper slots for the ram and have traded out/tested everything except the mb memory and graphics card.
when doing memtest86 it posts no errors and does not freeze.
zotac 1060 6gig
asrock ab350m
Ballistix 2400 2x8 kit
The system will freeze after about 40min of use if I reset right away it will last only 10ish leave off for an hr or so I get my 40 min again. (mouse does not move keyboard no input screen stays on the image it was on when freezing no blue screen or self rebooting)
When trouble shooting the system will not boot into windows with only a single stick of ram no matter which stick I use and if both sticks are in they have to be in the right order to boot (I can not trade which slot the sticks are in while still staying in the primary slots and it work)
I am using the proper slots for the ram and have traded out/tested everything except the mb memory and graphics card.
when doing memtest86 it posts no errors and does not freeze.
Last edited:
Facebook
Twitter
Instagram