Overclock safe?

[Guest]

My Tualatin Celeron 1.2 overclocks to 1344Mhz (112FSB) no problems, but am I likely to have any issues with my other hardware with the PCI bus at 37.3Mhz?

My only concern is data corruption on my IBM 60GXP 60Gb 7200rpm drive - am I right in thinking that I run the risk of problems doing this, or am I fine?

Seems to run 100% stable...

 

[Matisaro]

Most likely not, newer harddrives are not as prone to data corruption from fsb overclocks as old ones were.

I have a 60 gig 60gxp and have run it at fsb 145, with no data issues at all.

"The Cash Left In My Pocket,The BEST Benchmark"
No Overclock+stock hsf=GOOD!