i have an fx-8350 and ive overclocked it to 4.4ghz the max voltage is 1.453v and max temp is 63c, is this good? (im new to this, i just want some opinions)
i have an fx-8350 and ive overclocked it to 4.4ghz the max voltage is 1.453v and max temp is 63c, is this good? (im new to this, i just want some opinions)
ya it's good if you are using the stock CPU cooler , am using the same CPU with a stick cooler and stock speed and my temps are : idle : 29 , max load : 62
i have an fx-8350 and ive overclocked it to 4.4ghz the max voltage is 1.453v and max temp is 63c, is this good? (im new to this, i just want some opinions)
ya it's good if you are using the stock CPU cooler , am using the same CPU with a stick cooler and stock speed and my temps are : idle : 29 , max load : 62
i had it at 4.5ghz and the voltage was 1.460 and max temp 64-65 so i downclocked cause i thought it was hot, what do you think should i keep this or go back to 4.5ghz?
I am currently OCed at 4.5Ghz and I let the board control the voltage automatically. The max voltage reading on CPU-Z is 1.36v. I'm wondering why you're getting 1.4v+.
why is it that he's getting 1.45v+ for a relatively low OC? something must be wrong and that definitely causes higher temp due to higher power input. What's your motherboard by the way?
Mine is stable at 4.4 on stock voltage. (~ 1.375-1.40 when under full load, drops off when idle/light load)
AMD Application Power Management is off. Everything else is on (Cool & Quiet, C1E, C6, etc...)
I lapped the CPU heat spreader for copper-to-copper contact. At this speed/voltage it peaks at 56-57c with a Cooler Master Hyper 212 EVO when under full load. Any higher and I recommend either big air or water to be safe.