Question Overclocking the Z390 UD with i5 9600K , how to do it?

[dragonborn121]

Alright so ive been struggling with this so much.
Ive got the i5 9600k with the gigabyte Z390 UD mobo.
Im so lost in the bios menu that i have no idea how to overclock safely.
I have a water cooler so i think i should be safe but i have no idea how to set any of the settings.
There are barely any videos out there that help unless im silly and cant search properly.
Any help is immensely appreciated.

 

[winks42]

https://youtu.be/d8rY4TrcDXg

This video should be good. If not I can explain it.

 

[dragonborn121]

https://youtu.be/d8rY4TrcDXg

This video should be good. If not I can explain it.

Hi hi , i sent you a private message if you wouldnt mind helping me out , i would really appreciate it.

 

[Supahos]

Don't get help via pm, put it here so others can follow along later. That's the point of this place, put questions and answers here.

 

[dragonborn121]

Don't get help via pm, put it here so others can follow along later. That's the point of this place, put questions and answers here.

Terribly sorry , im new here so i didnt know , thank you for informing me.

 

[winks42]

Set the voltage at 1.320 to start and set the core multiplier to 4.5-4.8 to start. Then increase multipleier if the frequency was stable already and if it crashes increase the voltage a little bit until your desired clock is set. Make sure you run prime 95 or a stress test similar to see if your cpu is stable

 

[dragonborn121]

Set the voltage at 1.320 to start and set the core multiplier to 4.5-4.8 to start. Then increase multipleier if the frequency was stable already and if it crashes increase the voltage a little bit until your desired clock is set. Make sure you run prime 95 or a stress test similar to see if your cpu is stable

Would the Multiplier be the CPU clock ratio?