P4C800-C Deluxe & Raid

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I have 2 questions for you guys: (The 2nd is the most imporntant)
#1 in the Raid settings it has the IDE setting, if I set the BIOS to
that setting does that mean it will act as a regular IDE port??

#2 I have Raid setup (to IDE atm) and during boot it will detect the
HD on the raid channel yet I cant see it in windows. I have installed
the raid driver, yet in the device manager the Raid controller is
found and has the drivers but is comming up with the following error:
"The Device cannot start (Code 10) does anyone have any ideas on how
to fix this problem?? Thanks

DrHibbert

 

[Dano]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

When using the Promise Controller as a standard IDE (not RAID) controller,
you need a different driver for the Promise controller. Do not use the RAID
driver. Hopefully, that is the issue you're dealing with.

"DrHibbert" <DrHibbert@webwarriors.ca> wrote in message
news:ccc2i0tji4bbnbava0ahc4ntvkjr3hivo7@4ax.com...
>I have 2 questions for you guys: (The 2nd is the most imporntant)
> #1 in the Raid settings it has the IDE setting, if I set the BIOS to
> that setting does that mean it will act as a regular IDE port??
>
> #2 I have Raid setup (to IDE atm) and during boot it will detect the
> HD on the raid channel yet I cant see it in windows. I have installed
> the raid driver, yet in the device manager the Raid controller is
> found and has the drivers but is comming up with the following error:
> "The Device cannot start (Code 10) does anyone have any ideas on how
> to fix this problem?? Thanks
>
> DrHibbert