P4C800-Problem with Gigabit LAN :(

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Hi!

I have a strange problem here.
I use the P4C800 deluxe with a 2,8 GHz Prescott and Infinion RAM, not
overclocked.
Whenever i use a Gigabit Connection to the OnboardBoard LAN it will not
post. No bios, no beeps, nothing at all.
Afzter disconnecting the LAN it will still not post, i have to switch the
power supply of, make a reset and then - after connecting it again with
power and switching on it will post and i get the message that i have
overclocked too much and i can enter the bios.

When i use a 100 MBit connection all works fine.
The same Gigabit connection works fine of 2 other PC's.

Any ideas?

Best regards

Axel

 

[Tim]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Sounds really weird. Is the mobo mounted correctly? Has a screw dropped
between the mobo and case? Are mounting posts only in the correct positions?

- Tim


"Axel Gillert" <axolotl@blackoctagon.com> wrote in message
news:c9p7c6$k32$00$1@news.t-online.com...
> Hi!
>
> I have a strange problem here.
> I use the P4C800 deluxe with a 2,8 GHz Prescott and Infinion RAM, not
> overclocked.
> Whenever i use a Gigabit Connection to the OnboardBoard LAN it will not
> post. No bios, no beeps, nothing at all.
> Afzter disconnecting the LAN it will still not post, i have to switch the
> power supply of, make a reset and then - after connecting it again with
> power and switching on it will post and i get the message that i have
> overclocked too much and i can enter the bios.
>
> When i use a 100 MBit connection all works fine.
> The same Gigabit connection works fine of 2 other PC's.
>
> Any ideas?
>
> Best regards
>
> Axel
>
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Yes, all done. And, funnywise, when i plug the Gigabit cable in the MoBo
after WinXP has already startet it works fine with a 1GB connection...until
the next reboot...

"Tim" <Tim@NoSpam.com> schrieb im Newsbeitrag
news:c9pf6j$1bu$1@lust.ihug.co.nz...
> Sounds really weird. Is the mobo mounted correctly? Has a screw dropped
> between the mobo and case? Are mounting posts only in the correct
positions?
>
> - Tim
>
>
> "Axel Gillert" <axolotl@blackoctagon.com> wrote in message
> news:c9p7c6$k32$00$1@news.t-online.com...
> > Hi!
> >
> > I have a strange problem here.
> > I use the P4C800 deluxe with a 2,8 GHz Prescott and Infinion RAM, not
> > overclocked.
> > Whenever i use a Gigabit Connection to the OnboardBoard LAN it will not
> > post. No bios, no beeps, nothing at all.
> > Afzter disconnecting the LAN it will still not post, i have to switch
the
> > power supply of, make a reset and then - after connecting it again with
> > power and switching on it will post and i get the message that i have
> > overclocked too much and i can enter the bios.
> >
> > When i use a 100 MBit connection all works fine.
> > The same Gigabit connection works fine of 2 other PC's.
> >
> > Any ideas?
> >
> > Best regards
> >
> > Axel
> >
> >
> >
>
>