Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
I have just added a pair of WD 250gb SATA drives set up as a 500gb RAID 0
Array. They work fine on their own but as soon as I try to install my
Promise TX2000 RAID card the PC doesn;t get further than the Windows XP
flag.
My systemis configured as follows:
P4 3.06 HT enabled
2gb RAM in 4x512mb chips
AGP - Geforce 5950 Ultra 2mb 8x AGP
PCI1 - Empty
PCI2 - Matrox RTX.100
PCI3 - Empty
PCI4 - SB AUdigy 2 Platinum Ex
PCI5 - Promise TX2000 with 4x Matrox 160gb JBOD
I tried reinstalling WIndows XP, I also reseated the PRomise into PCI3 and
still the same result. The only time the promise will boot completely is if
there are no drives connected.
My PSU is 550w so I doubt if the power is the problem? ANy ideas?
Regards
Mark
I have just added a pair of WD 250gb SATA drives set up as a 500gb RAID 0
Array. They work fine on their own but as soon as I try to install my
Promise TX2000 RAID card the PC doesn;t get further than the Windows XP
flag.
My systemis configured as follows:
P4 3.06 HT enabled
2gb RAM in 4x512mb chips
AGP - Geforce 5950 Ultra 2mb 8x AGP
PCI1 - Empty
PCI2 - Matrox RTX.100
PCI3 - Empty
PCI4 - SB AUdigy 2 Platinum Ex
PCI5 - Promise TX2000 with 4x Matrox 160gb JBOD
I tried reinstalling WIndows XP, I also reseated the PRomise into PCI3 and
still the same result. The only time the promise will boot completely is if
there are no drives connected.
My PSU is 550w so I doubt if the power is the problem? ANy ideas?
Regards
Mark