PC Build Components for loading webpages fastest?

[michaelbaker120]

Part of my business depends on being able to load webpages faster than my competitors. Even if it is only .1ms faster, are there certain components I should purchase in order to load/display webpages faster?

 

[BlueBeast]

If you already have a decent graphics card and ram, you should just upgrade to SSD storage and get a faster CPU, and keeping your storage clean also helps out a lot with fast refreshing and startup. So try to avoid any unnecessary programs.

 

[elan4790k]

The three most important things in order are good internet, an SSD and ram. Your competitors probably have similar internet to you but poor computers. I don't know how much your willing to spend. If you get the best of the top three things above along with a top cpu and graphics card you have the fastest loading times.

 

[okcnaline]

Make sure your motherboard has some high-level ethernet card on board. Probably something with Killer E2200. And the SSD and RAM is also beneficial. Also, get a CPU with 4 or more threads. Then you're really safe.

 

[michaelbaker120]

Make sure your motherboard has some high-level ethernet card on board. Probably something with Killer E2200. And the SSD and RAM is also beneficial. Also, get a CPU with 4 or more threads. Then you're really safe.

I am looking to build a custom PC from here:
https://www.maingear.com/boutique/pc/configurePrd.asp?idproduct=2325

It has an Asus Z10PE-D8 WS motherboard. What ethernet card does it have on-board and how does it compare to the Killer E2200?

Would I be able to purchase a separate high-end ethernet card instead of using the on board ethernet card if I wanted to? I did review killernetworking.com and like the idea of prioritizing specific website traffic.

 

[okcnaline]

Why do you need 2 LGA2011-3 processors?
I think it's I217-LM. It won't be as fast as Killer E2200.
Also, if you're going to pay for gigabit network cards, those run for >$200.

 

[michaelbaker120]

Why do you need 2 LGA2011-3 processors?
I think it's I217-LM. It won't be as fast as Killer E2200.
Also, if you're going to pay for gigabit network cards, those run for >$200.

I'm not sure what the LGA2011-3 is. If you are referring to the dual CPUs I need those for virtual machines.

Can you recommend a gigabit network card that I can upgrade to that will be at least as fast or faster than the Killer E2200?

 

[okcnaline]

Wait... This is very different than what I'm expecting.

Tell me the entire situation.

 

[michaelbaker120]

The motherboard for the PC build on this site is the Asus® Z10PE-D8 WS:
https://www.maingear.com/boutique/pc/configurePrd.asp?idproduct=2325

I'm not sure what the LGA2011-3 that you mentioned is.

I would like to know what ethernet card the Asus Z10PE-D8 WS uses and how comparable it is to the Killer E2200. If it is not as fast as the Killer E2200 then I would like to know if I can purchase a stand alone upgraded ethernet card that can perform as fast as the Killer E2200.

 

[okcnaline]

I know that...
What I mean is, what is the premise of the competition?