Hello,
After installing all of my components and plugging into a display, I was unable to get a signal and bios didnt boot. (mobo lights come on, psu and cpu cooler fan spins for a second or two then stop, no beeps from on board speaker)
I then followed these steps per the sticky post and am still getting nothing, fearing that I have either a faulty mobo, cpu or psu.
I currently have everything pulled and tried breadboarding, with only the cpu power, cpu cooler fan, front panel pins, and the 24 pin power supply cable plugged in.
Here is a video of what happens when I boot and some pictures.
As a first time builder any input would be greatly appreciated, thanks.
(Here is my full part list building in an ncase m1.)
After installing all of my components and plugging into a display, I was unable to get a signal and bios didnt boot. (mobo lights come on, psu and cpu cooler fan spins for a second or two then stop, no beeps from on board speaker)
I then followed these steps per the sticky post and am still getting nothing, fearing that I have either a faulty mobo, cpu or psu.
I currently have everything pulled and tried breadboarding, with only the cpu power, cpu cooler fan, front panel pins, and the 24 pin power supply cable plugged in.
Here is a video of what happens when I boot and some pictures.
As a first time builder any input would be greatly appreciated, thanks.
(Here is my full part list building in an ncase m1.)
Facebook
Twitter
Instagram