PC for autocad 2D

[Krii]

I m from Latvia (its a country) Smiley Very Happy ...so my english grammar is not so well (hope you'll understand)

Hello, I'd like to know what CPU,MB,RAM, VIDEO,PSU do you recommend, that works best with Autocad 2016? i Use 2D ~55Mb large files and my pc is turned on 24/7... i use 2x 24'' monitors

CPU

i Looked at cpu
Intel i7-6700K and Intel Core i7-4790K and XEON E3 - 1271 V3 but which is better for autocad? meybe someone OTHER?

i need that xeon and ECC ram or not? :/

VIDEO

i need to take something like quadro k620 or k2200?? How i tell - my files is ~55MB large... Now I work in 2D (Autocad LT 2015) and maybe someday use 3d....

MB
if my computer is turned on 24/7 - i need some asus sabertooth z170 mark 1 motherboard or i can use good with asus z170-a ? The same question in mark1 plate in z97... (4790k)

I draw somethink like this

 

[Krii]

?

 

[turkey3_scratch]

I would get an I7-5820K.

 

[g-unit1111]

You don't necessarily need a Quaddro for 2-D AutoCAD. That's what is recommended on the Autodesk website, and they're, well, wrong. I run a GTX 760 on my workstation and it handles 2-D AutoCAD, 3-D Revit, and 3-D Sketchup, and it handles just about everything I can throw at it. The low end Quaddros are not worth investing in as these are really old cards. The high end Quaddros come with an insanely high price tag. You can run consumer level cards on Autodesk software and be perfectly fine.

 

[Krii]

I would get an I7-5820K.

why 5820? autocad use Single Thread? https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/Support-for-multi-core-processors-with-AutoCAD.html and in https://www.cpubenchmark.net/singleThread.html 4790k in is 1st place :/ i dont know - maybe 5820k is better but why?...?

 

[Krii]

You don't necessarily need a Quaddro for 2-D AutoCAD. That's what is recommended on the Autodesk website, and they're, well, wrong. I run a GTX 760 on my workstation and it handles 2-D AutoCAD, 3-D Revit, and 3-D Sketchup, and it handles just about everything I can throw at it. The low end Quaddros are not worth investing in as these are really old cards. The high end Quaddros come with an insanely high price tag. You can run consumer level cards on Autodesk software and be perfectly fine.

but with 55mb large file it work good? why autocad reccomend quadro cards?

 

[Krii]

You don't necessarily need a Quaddro for 2-D AutoCAD. That's what is recommended on the Autodesk website, and they're, well, wrong. I run a GTX 760 on my workstation and it handles 2-D AutoCAD, 3-D Revit, and 3-D Sketchup, and it handles just about everything I can throw at it. The low end Quaddros are not worth investing in as these are really old cards. The high end Quaddros come with an insanely high price tag. You can run consumer level cards on Autodesk software and be perfectly fine.

can you recomend any z97 motherboard? i need very stable... my pc work 24/7

 

[turkey3_scratch]

Interesting it is only single-threaded. You could probably get a Pentium processor and overclock the crap out of it on a fantastic motherboard.

 

[Krii]

Interesting it is only single-threaded. You could probably get a Pentium processor and overclock the crap out of it on a fantastic motherboard.

I'm not overclocker 🙁

 

[g-unit1111]

but with 55mb large file it work good? why autocad reccomend quadro cards?

That doesn't matter on the graphics side, only on the processor side.

can you recomend any z97 motherboard? i need very stable... my pc work 24/7

How much do you want to spend?

 

[Krii]

but with 55mb large file it work good? why autocad reccomend quadro cards?

That doesn't matter on the graphics side, only on the processor side.

can you recomend any z97 motherboard? i need very stable... my pc work 24/7

How much do you want to spend?

For all computer parts - max 1500Eur (1,610.50USD)
CPU 4790k (box) cost ~349eur
PSU corsair hx750i cost ~165Eur i dont know - i need 750w or not... i take it becouse i hope it will be with reserve :/
i looked at RAM Corsair Dominator Platinum 16GB (2 x 8GB) DDR3-2133 CL9 i dont know - i need 2133mhz and cl 9 or i can use autocad good with 1866 cl9 🙁
corsair h100i cooler :/ i need that? or i can normally use 4790k box cooler or can take some good air cooler?