[SOLVED] Pc not turning on after applying thermal paste

[Karthik nair]

I just yesterday on 16/7/2020 applied thermal paste on my cpu I kept the computer on ground and sat in the floor to apply the thermal compound but after doing all the usual checking and placing the cooler tight the pc is not turning on still(no signs of life). nothing is turning on even the light on my motherboard is not turning on.

My pc specs:-
1.)Intel e1260 dual core processor @1.8ghz
2.) 2gb DDR2 800mhz single channel ram 800mhz
3.) gigabyte ga-945-gcm-s2l motherboard
4.)500gb ide drive
Plzzz help I am a student and I want my computer back urgently for study purpose.

Thanks in advance
Edit:- I have pulled out the cpu and also reseated it and also I have applied a new application of thermal paste. I did not remove the ide connector and the 24pin because the ide connector and the 24pin power connectors are really tight.so should I try to remove them??????.or try to fix it in any other way????plzzz help me😅😅😅

 

[Gerald6049]

Check for 24 pin and 4 pin power. try reseat the RAM and make sure front panel header (the cord from power button on the case to motherboard) is properly connected.

 

[Vic 40]

You didn't by any chance flip the switch on the back of the psu?