PC not working after the processor was removed

[Mihai_16]

I have an old Dell GX620 that i use for browsing the internet at my grandparents, it's an old pc.. Intel Pentium 4 3ghz , 4GB DDR2 RAM, 256MB video card, and i wanted to install a new processor in it knowing that i ordered it online, they said that it will come today , and how exited i am i remove the old Pentium from it socket and let it on the table , waiting for them to come , and a call cames that they will be late by one day, i put the processor back , HS too , press the power button and all i see is the power button glowing orange and i'm really scared that the motherboard is dead

 

[elbert]

Check your CPU pins to make sure you didn't bend any and did you clean off the old paste to use new thermal paste?

 

[Mihai_16]

Sry for down voting, yeah i did

 

[noobwithpc]

Sry for down voting, yeah i did

No problem I up voted so everything is fine.

 

[elbert]

Did you unplug anything like the motherboards CPU power plug next to the CPU? You could unplug from the wall and try removing the motherboard battery for 5 minutes to reset the bios. Try taking a pic of the inside of the case. Maybe we can see the issue.

 

[Mihai_16]

I found something interesting,when i remove the CPU the PC fans turn on but when i put it back (and Heatsink) the PC doesnt even turn on the fans

 

[elbert]

Check for missing pins but at this point has your other CPU arrived? Its possible a CPU pin is stuck in the socket. You may want to unlock and flip the case up so any logged can fall out. Else you could damage the new CPU.

 

[Mihai_16]

Oh my god thank you so much