PC not working

[Scytra]

Today when i started my PC up but my screen didn't get a signal and stayed black. I tried an other screen and it didn't get a signal either. After that I tried my screen on just 1 GPU and still no signal. Last I tried to an other PSU with just 1 GPU and no signal if you know what is wrong please tell me.(btw my fans where spinning)

my specs.

motherboard: Gigabyte GA­Z97X­SLI

CPU: Intel Core i5­4690

GPU: crossfire MSI R9 270X Gaming 2G

PSU: Seasonic M12II Bronze EVO 750W

 

[ESPclipse]

Does your motherboard flash LEDs at POST, and if so, are any consistently flashing or remain lit? Does your motherboard have a system speaker from which you can record beep codes? If so, and you hear more than one short beep, consult the motherboard manual to help locate the problem component. If none of these suggestions are of any use to you, try breadboarding the system to look for problem components. Has anything change to the computer recently that may have incited the issue?

 

[Scytra]

Does your motherboard flash LEDs at POST, and if so, are any consistently flashing or remain lit? Does your motherboard have a system speaker from which you can record beep codes? If so, and you hear more than one short beep, consult the motherboard manual to help locate the problem component. If none of these suggestions are of any use to you, try breadboarding the system to look for problem components. Has anything change to the computer recently that may have incited the issue?

So when I start the PC I hear 2 beeps i can't hear if they are 1 short and 1 lon g or 2 short beeps.

 

[D_Know_WD]

Hi there Scytra,

According to this: http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816, the beeps could be related to faulty RAM.
In case you have more than one RAM stick, try to boot with only one at a time. In case you have only one RAM stick, you need to borrow one from somebody and see whether this is the case.

Cheers,
D_Know_WD

 

[Scytra]

Hi there Scytra,

According to this: http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816, the beeps could be related to faulty RAM.
In case you have more than one RAM stick, try to boot with only one at a time. In case you have only one RAM stick, you need to borrow one from somebody and see whether this is the case.

Cheers,
D_Know_WD

THe site says that 2 short beeps mean that the system normal is.
(I already tested it with just 1 RAM stick)

 

[Scytra]

I remember now. A few days ago i had a error called Machine_check_exception. I know that it is a hardware error.

 

[-HH-]

Rorschach! :3

It sounds like you have a CMOS problem. I'd suggest an RMA on the board.

 

[Vic 40]

http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816, the beeps could be related to faulty RAM.

THe site says that 2 short beeps mean that the system normal is.

No

2 short beep ：CMOS Error
or
1 long beep and 1 short beep：Memory error

So ram or maybe motherboard issue.Did youm try a clear cmos? Try it with one module,put it in the second slot from the cpu.

 

[Scytra]

Just one little quastion i can just safely remove my CPU rught?

 

[-HH-]

Make sure you have the anti static band/rubber gloves on when doing so, lift the retention arm and you should be able to lift it out of the socket!