Hi Guys,
I was on my PC one evening and my game froze and the PC was no longer responding. I had no other choice but to shut down via pressing power button for 5 seconds.
Upon rebooting I got no display and my peripherals don't light up. PSU light is green, case fans spin, CPU fan spins, GPU fans spin. I decided to strip back my PC component by component in an attempt to find the faulty piece. I got all the way back to just my Mobo, PSU, Cpu & CPU cooler and still had no joy to even reach bios.
I have tried singular sticks of RAM, all 4 RAM slots switching between either of my 2 sticks of RAM and still didn't get anywhere. I then tried my old PSU which I was using before upgrading to my current which I know worked last time I used and this didn't work either.
I've bought a case speaker and with just Mobo and CPU I get continuous beep indicating no RAM and after inserting RAM I get no beep codes from speaker but still don't have a display. I've RMAd my Motherboard and Gigabyte have tested and works fine (and sent me the YT video of it on their breadboard system).
Has anyone got any ideas? I'm assuming the case speaker confirms RAM is ok so therefore it must be CPU related?
Pc Specs:
Intel i7-4770k
Gigabyte Z87-D3HP Mobo
Corsair AX760i Digital ATX '80 Plus Platinum' PSU
Kingston Hyper X DDR3 1866 2 x 4gb
Appreciate any responses and suggestions.
Thanks.
I was on my PC one evening and my game froze and the PC was no longer responding. I had no other choice but to shut down via pressing power button for 5 seconds.
Upon rebooting I got no display and my peripherals don't light up. PSU light is green, case fans spin, CPU fan spins, GPU fans spin. I decided to strip back my PC component by component in an attempt to find the faulty piece. I got all the way back to just my Mobo, PSU, Cpu & CPU cooler and still had no joy to even reach bios.
I have tried singular sticks of RAM, all 4 RAM slots switching between either of my 2 sticks of RAM and still didn't get anywhere. I then tried my old PSU which I was using before upgrading to my current which I know worked last time I used and this didn't work either.
I've bought a case speaker and with just Mobo and CPU I get continuous beep indicating no RAM and after inserting RAM I get no beep codes from speaker but still don't have a display. I've RMAd my Motherboard and Gigabyte have tested and works fine (and sent me the YT video of it on their breadboard system).
Has anyone got any ideas? I'm assuming the case speaker confirms RAM is ok so therefore it must be CPU related?
Pc Specs:
Intel i7-4770k
Gigabyte Z87-D3HP Mobo
Corsair AX760i Digital ATX '80 Plus Platinum' PSU
Kingston Hyper X DDR3 1866 2 x 4gb
Appreciate any responses and suggestions.
Thanks.