Question PC runs perfectly, but randomly freezes, BSOD's, Reboots, Runs perfect for another day or two! IM LOST!

MrSix18

Prominent
Mar 8, 2019
31
2
535
0
I know people hate BOLD and colors. But without it, this entire post would be horribly constructed and my OCD kicked in and made me try to clean it up a bit.

Basically, my PC works absolutely great, and has been for a while! But after I installed my second monitor (the ONLY thing I can recall doing around when this all started) it started acting up. NO reason whatsoever will cause this to happen, its completely random and happens about every 24 hours or so. I'll be on the internet, gaming, or whatever, and it will freeze completely with zero response. Then BSOD just long enough for me to attempt to read what code at the bottom it threw but it reboots so fast I can't see it, then runs fine for another 18-24 hours before it'll happen again. I LITERALLY LOST MY MIND trying to track this problem down for god knows how long now. Checking everything in event viewer, my overclocks (which I removed even though it still BSOD's with CPU/GPU/RAM at stock clocks or OC'd), checked thermals, Windows image health, everything I can think of (which I'm not a master tech PC guy and do not claim to be) and I cannot find the reason this is happening.

SOOO here I am..

I'm going to post the ONLY entries in the event viewer I can find that happened around the same time as the crash did, a lot of these happen daily but they may of just so happened to be around the same time of every crash and I cannot find the fix so it may help with the diagnosis. ill put them in bold print.

---1) svchost (11648,R,98) TILEREPOSITORYS-1-5-18: Error -1023 (0xfffffc01) occurred while opening logfile C:\WINDOWS\system32\config\systemprofile\AppData\Local\TileDataLayer\Database\EDB.log.
---2) Faulting application name: SystemSettings.exe, version: 10.0.18362.1049, time stamp: 0x066bf1a5
Faulting module name: SystemSettingsViewModel.Desktop.dll, version: 10.0.18362.1110, time stamp: 0x5f5b2a3e
Exception code: 0xc0000409
Fault offset: 0x0000000000081dbe
Faulting process id: 0x2f88
Faulting application start time: 0x01d6a59331268ce9
Faulting application path: C:\Windows\ImmersiveControlPanel\SystemSettings.exe
Faulting module path: C:\Windows\ImmersiveControlPanel\SystemSettingsViewModel.Desktop.dll
Report Id: b4ec05d6-b1e0-4741-a5a6-6c200dcac5f9
Faulting package full name: windows.immersivecontrolpanel_10.0.2.1000_neutral_neutral_cw5n1h2txyewy
Faulting package-relative application ID: microsoft.windows.immersivecontrolpanel

---3)The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{C2F03A33-21F5-47FA-B4BB-156362A2F239}
and APPID
{316CDED5-E4AE-4B15-9113-7055D84DCC97}
to the user DEREKS-DESKTOP\DYNO SID (S-1-5-21-1439994076-2020391597-959261161-1001) from address LocalHost (Using LRPC) running in the application container Microsoft.Windows.ShellExperienceHost_10.0.18362.449_neutral_neutral_cw5n1h2txyewy SID (S-1-15-2-155514346-2573954481-755741238-1654018636-1233331829-3075935687-2861478708). This security permission can be modified using the Component Services administrative tool.

--4) (directly after number 3 this came) 6062 - Lso was triggered

THEN THE CRASH CAME AND THIS WAS UNDER CRITICAL LEVEL

The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. EVENT ID 41. SOURCE-KERNAL POWER. TASK CATAGORY 63. KEYWORDS (70368744177664),(2)

ANY HELP WOULD BE BEYOND APPRECIATED AS IM FED UP!!! I WILL BE HUNTING THIS ISSUE DOWN ALL NIGHT AND WILL BE BY THE COMPUTER IF YOU NEED ME TO RUN ANYTHING OR HAVE ANY QUESTIONS. THANK YOU SOO MUCH FOR YOUR TIME EVEN IF YOU CANNOT HELP.

Specs are below

9700k @ 5.1 (also stock, but doesnt matter still BSOD's)
EVGA 2080 Super XC Ultra
32GB Corsair Vengeance Pro RGB @ 3ghz
Aorus Z390 Mobo
2 x 1TB 970 Evo NVME's
2 TB 860 Evo
4TB Toshiba x300
Corsair h115i AIO
5 Noctua redux 140mm 1500RPM fans
2 Noctua 12Volt 3000RPM server fans
Motu M2 Audio interface
Rode PodMic
 
Hey there,

Chances are it's your PSU. Restarts like that point to a PSU issue. You haven't listed yours! Also Any OC's on your system will not help. So run at stock until diagnosis is clear.

Can you swap the PSU and test? Maybe get one from a friend? Otherwise bringing to a local repair store and getting them to swap out PSU is another option.
 

MrSix18

Prominent
Mar 8, 2019
31
2
535
0
i built the pc and about 20 or so others myself, just am not seasoned in the disagnosing problems i cannot see aspect of the PC world.. i swapped out the PSU just now and going to see if the problem continues, the psu that was in it wasnt very old. 850 W EVGA g3. I had thought it was a corrupt profile, but wanted to see what you guys thought but my second guess was indeed the PSU. any programs or anything to check the output or log the output and then see if it indeed dips in power around the time of the crash?? and yes all overclocks have been returned to stock minus fan curves but even with the overclocks it didnt seem to affect. just hard to believe the psu works fine for 1-2 days then drops power for a split second out of all that time causing the crash??? but then again, who knows. Thanks for the response though man!!
 

wi5pa

Distinguished
May 20, 2012
186
22
18,615
6
I doubt its the psu. The kernal 41 and 63 errors just tell you the computer blue-screened with unknown reason.

Test your memory with Memtest64 would be the next thing.
theres lots of reasons i.e -might be corrupted windows files, or a driver install, youll have to go and eliminate each thing.
 

ASK THE COMMUNITY