Hey. I have an X58 Motherboard with a Xeon CPU.
Here's what happens: (please note that it's a breadboard build)
- If I start the PC with one stick of RAM, CPU and 8pin ATX cable, the PC shuts itself down after 2 seconds or so
- If I start it without the 8pin connector, the motherboard works, but I can't get to the POST screen (that's obvious, right?)
- If I start it without the CPU but with the 8pin connector, same thing happens as mentioned in step 2.
Yes, the CPU is installed correctly and the heatsink holds its position.
Motherboard speaker just clicks. The PSU looks fine since it starts the motherboard and it gets a voltage.
CPU: Tested Intel Xeon X5570 and X5670 (both do the same)
Motherboard: GA-X58-USB3
PSU: Fortron Hyper 700
This first occured when I exchanged my CPU for the X5670.
Thanks for the help.
Here's what happens: (please note that it's a breadboard build)
- If I start the PC with one stick of RAM, CPU and 8pin ATX cable, the PC shuts itself down after 2 seconds or so
- If I start it without the 8pin connector, the motherboard works, but I can't get to the POST screen (that's obvious, right?)
- If I start it without the CPU but with the 8pin connector, same thing happens as mentioned in step 2.
Yes, the CPU is installed correctly and the heatsink holds its position.
Motherboard speaker just clicks. The PSU looks fine since it starts the motherboard and it gets a voltage.
CPU: Tested Intel Xeon X5570 and X5670 (both do the same)
Motherboard: GA-X58-USB3
PSU: Fortron Hyper 700
This first occured when I exchanged my CPU for the X5670.
Thanks for the help.