Question Pc start with screw driver

[Rahee|]

https://twitter.com/x/status/1575119957934985216

My PC start button have some issue, it takes many tries to start. I have to press it in many different angles for 2-3 minutes then it starts.

I have seen that I can start pc with screwdriver. Please see the attached pic and tell me

1. If I have highlighted the right pins to start my pc?

2. If accidentally I touched any other pins with screw driver will it damage any thing?

 

[DRagor]

1. Yes.
2. Absolutely it can.

 

[geofelt]

Yes, actually, PWR and either ground will work.

Not likely to damage anything if you touch other pins.

Your case maker may be able to supply a replacement start button.
Or, you could buy something like this:
https://www.amazon.com/Computer-LITROK-External-Motherboard-Extension/dp/B09CZCJYSL

 

[Zerk2012]

https://twitter.com/x/status/1575119957934985216

My PC start button have some issue, it takes many tries to start. I have to press it in many different angles for 2-3 minutes then it starts.

I have seen that I can start pc with screwdriver. Please see the attached pic and tell me

1. If I have highlighted the right pins to start my pc?

2. If accidentally I touched any other pins with screw driver will it damage any thing?

If your case has a reset switch you can connect that where the power switch goes and just use the reset switch to cut it on.