PC Starts UP then Shuts Down

Comical_2

Prominent
Mar 24, 2017
1
0
510
Hello, ive been building a pc over the past month and finally finished it. I went to boot it up and it worked. The problem was there was no display on screen, then the pc shut itself down, then restarted again after that. It keeps doing that and everything is new in my pc, except the graphics card and monitor.

Intel Pentium Dual Core G4560 3.5 GHz CPU

Corsair CP-9020097-UK VS550 ATX/EPS Vs Series 80 Plus Power Supply Unit

Gigabyte H110M-S2H Motherboard (Socket 1151, H110 Express, DDR4, S-ATA 600, Micro ATX)

CiT Vanquish Gaming Toolless Case with USB3 Port, Side Window, Card Reader and 2 x 12CM Red Led Fans

yperX FURY 8 GB DDR4 2400 MHz Memory i have only one ram card

I havent tried to spam the delete button yet when i boot up the pc so thats what im going to try next.
 
Solution
You bought the wrong board.

Your pentium g4560 is a kaby lake generation CPU; your h110 board likley shipped with an old bios on it that does not yet support kabby lake cpus.

You cant fix this problem with what you have because you need motherboard to boot to bios to upgrade the bios, but you cant get the computer to boot to bios when you dont have a suported cpu.

You (or a shop) needs to install a skylake cpu and flash the bios, or you need to return motherbaord and buy a b250 motherboard.

Seanie280672

Estimable
Mar 19, 2017
1,958
1
2,960


Which graphics card ? does it require power plugging into the back of it which maybe you've forgotten to do ?
 
You bought the wrong board.

Your pentium g4560 is a kaby lake generation CPU; your h110 board likley shipped with an old bios on it that does not yet support kabby lake cpus.

You cant fix this problem with what you have because you need motherboard to boot to bios to upgrade the bios, but you cant get the computer to boot to bios when you dont have a suported cpu.

You (or a shop) needs to install a skylake cpu and flash the bios, or you need to return motherbaord and buy a b250 motherboard.
 
Solution