PC turns on, but no display or beeps

[Goran_S]

So today I built a custom gaming pc. This is my second time building a custom computer on my own. I turned it on, all fans are spinning including the HSF (Heat Sink). There are no POST beeps when I turn on my PC. Whenever I connect my PC to my monitor, my monitor says, "No Signal". I'm connecting to my monitor via my graphics card through a DVI to VGA adapter. Someone please help me.

PC Specs:
EVGA Geforce GTX 750 ti
Intel Pentium G3258 @ 3.2 GHz w/ stock cooler
ASUS H81M-A Motherboard
Corsair Vengeance 8gb (1 stick)
WD Caviar Blue 1TB 7200RPM hard drive

 

[JBRONCFAN]

Is the heatsink fan plugged into the fan port marked for CPU? Any fan port will spin that fan but if there is no fan plugged into the CPU fan port pc will think there is no hs fan and purposely not post.

 

[JBRONCFAN]

I had same problem on a recent build and I had to reinstall my cpu. Just sayin......

 

[Goran_S]

Is the heatsink fan plugged into the fan port marked for CPU? Any fan port will spin that fan but if there is no fan plugged into the CPU fan port pc will think there is no hs fan and purposely not post.

I had same problem on a recent build and I had to reinstall my cpu. Just sayin......

The heatsink fan is plugged into the correct CPU_Fan header on the motherboard.

 

[JBRONCFAN]

Try reinstalling your CPU. Absolutely can't hurt anything and you never know.......

After checking off all the things off the idiot list like, is everything plugged in like it's supposed to be.

 

[Goran_S]

Try reinstalling your CPU. Absolutely can't hurt anything and you never know.......

After checking off all the things off the idiot list like, is everything plugged in like it's supposed to be.

Thanks! After reinstalling the CPU I was able to POST! Must have installed the CPU in a wrong way the first time...

 

[JBRONCFAN]

Glad it worked out.