- Jan 1, 2018
- 3
- 0
- 510
Specs:
-Ryzen 5 1600
-MSI B350 Gaming Plus
-Gigabyte GTX 1060 3gb
-Corsair Vengence RGB 16gb 3000MHz (2x8gb)
-Seasonic M12 ii Bronze Evo Edition 620w
I built this computer 4-5 months ago and there has been no problems since. Today when I got home from vacation the computer turned on like normal when I pushed the button on the case but none of my peripherals would turn on. For a fraction of a second, the backlight flashes on my keyboard then goes away. I know power is being sent out to the USB ports because the LED strip that is connected to one that runs along my desk is working fine.
When I turn the PC on, there is no beep. I don’t recall there ever being one, but if there was there isn’t now. Looking at the EZ Debug lights when you turn it on, the top CPU light comes on for a second, then the one below it for the DRAM joins it for like 4 seconds, then they both turn off, do the same thing, and turn off again but for good. This happens every time the PC is started.
Not sure how to but I put a screw driver in the CMOS pins to short it out, didn’t work. Took out that battery, and put it back in after like 20 mins, didn’t work...
I really don’t want to have to take apart my whole PC but I guess I would if I had to. I don’t see how the CPU could have became unplugged cause it was snapped down tight from the beginning.
I also tried taking out both ram sticks, placed one in each slot by itself every time and nothing.
Any help would be great!! I will be stalking this thread because I need this thing fixed.
-Ryzen 5 1600
-MSI B350 Gaming Plus
-Gigabyte GTX 1060 3gb
-Corsair Vengence RGB 16gb 3000MHz (2x8gb)
-Seasonic M12 ii Bronze Evo Edition 620w
I built this computer 4-5 months ago and there has been no problems since. Today when I got home from vacation the computer turned on like normal when I pushed the button on the case but none of my peripherals would turn on. For a fraction of a second, the backlight flashes on my keyboard then goes away. I know power is being sent out to the USB ports because the LED strip that is connected to one that runs along my desk is working fine.
When I turn the PC on, there is no beep. I don’t recall there ever being one, but if there was there isn’t now. Looking at the EZ Debug lights when you turn it on, the top CPU light comes on for a second, then the one below it for the DRAM joins it for like 4 seconds, then they both turn off, do the same thing, and turn off again but for good. This happens every time the PC is started.
Not sure how to but I put a screw driver in the CMOS pins to short it out, didn’t work. Took out that battery, and put it back in after like 20 mins, didn’t work...
I really don’t want to have to take apart my whole PC but I guess I would if I had to. I don’t see how the CPU could have became unplugged cause it was snapped down tight from the beginning.
I also tried taking out both ram sticks, placed one in each slot by itself every time and nothing.
Any help would be great!! I will be stalking this thread because I need this thing fixed.
Facebook
Twitter
Instagram