Question PC underperforming

[Solblinks]

Any ideas why pcs ram could be under performing. Gpu is overclocked using msi auto overclock and xmp is enabled for the gskill it is only showing 2133mhz on userbenchmark test. ? Any help

https://www.userbenchmark.com/UserRun/58484103

UserBenchmarks: Game 97%, Desk 93%, Work 92%

||Model|Bench
:----|:----|:----|
CPU|AMD Ryzen 5 5600X|90.8%
GPU|Nvidia RTX 2070|105.8%
RAM|G Skill Intl F4-3600C17-8GTZR 4x8GB|67.5%
MBD|Asus ROG STRIX B450-F GAMING|

UserBenchmarks: Game 97%, Desk 93%, Work 92%
CPU: AMD Ryzen 5 5600X - 90.8%
GPU: Nvidia RTX 2070 - 105.8%
SSD: Samsung 860 Evo 1TB - 128.3%
RAM: G Skill Intl F4-3600C17-8GTZR 4x8GB - 67.5%
MBD: Asus ROG STRIX B450-F GAMING

 

[EyyMunchian]

Any ideas why pcs ram could be under performing. Gpu is overclocked using msi auto overclock and xmp is enabled for the gskill it is only showing 2133mhz on userbenchmark test. ? Any help

https://www.userbenchmark.com/UserRun/58484103

UserBenchmarks: Game 97%, Desk 93%, Work 92%

||Model|Bench
:----|:----|:----|
CPU|AMD Ryzen 5 5600X|90.8%
GPU|Nvidia RTX 2070|105.8%
RAM|G Skill Intl F4-3600C17-8GTZR 4x8GB|67.5%
MBD|Asus ROG STRIX B450-F GAMING|

UserBenchmarks: Game 97%, Desk 93%, Work 92%
CPU: AMD Ryzen 5 5600X - 90.8%
GPU: Nvidia RTX 2070 - 105.8%
SSD: Samsung 860 Evo 1TB - 128.3%
RAM: G Skill Intl F4-3600C17-8GTZR 4x8GB - 67.5%
MBD: Asus ROG STRIX B450-F GAMING

XMP might be enabled but sometimes a motherboard will ask you to select a profile, did you select it? Try selecting a lower profile and see if it works. Is your RAM voltage 1.35v? typically XMP requires more power to operate. Can you send a picture of the SPD and Memory page on CPU-Z

 

[Ralston18]

Under the "Memory Kit" section of the benchmark note the red triangle with an interior exclaimation mark.

Specifically:

"Performing below potential (5th percentile) - ensure that a dual+ channel XMP BIOS profile is enabled: How to enable XMP"

What, if anything , have you tried with respect to that warning?

 

[Solblinks]

Under the "Memory Kit" section of the benchmark note the red triangle with an interior exclaimation mark.

Specifically:

"Performing below potential (5th percentile) - ensure that a dual+ channel XMP BIOS profile is enabled: How to enable XMP"

What, if anything , have you tried with respect to that warning?

not sure why i would have to enable dual channel in bios settings or if thats possible. Yes all settings are default minus XMP which is enabled. its 4 sticks of ram

 

[Solblinks]

XMP might be enabled but sometimes a motherboard will ask you to select a profile, did you select it? Try selecting a lower profile and see if it works. Is your RAM voltage 1.35v? typically XMP requires more power to operate. Can you send a picture of the SPD and Memory page on CPU-Z

bios shows xmp enabled . correct speed should be selected. here is cpuz screen shots

https://imgur.com/0Sy1mIO

View: https://imgur.com/0Sy1mIO

https://imgur.com/69k4mUm

View: https://imgur.com/69k4mUm

 

[Ralston18]

Are the memory sticks a matched set for dual channel use?

 

[Solblinks]

Are the memory sticks a matched set for dual channel use?

Link below is the ram

https://www.newegg.com/g-skill-32gb...Notification-Responsive-USA-_-N82E16820232484

 

[Solblinks]

XMP might be enabled but sometimes a motherboard will ask you to select a profile, did you select it? Try selecting a lower profile and see if it works. Is your RAM voltage 1.35v? typically XMP requires more power to operate. Can you send a picture of the SPD and Memory page on CPU-Z

here are bios photos aswell. you can see d.o.c.p enabled and below 3600 selected. but in second photo u can see it is showing 2133

https://imgur.com/qIZzeXY

View: https://imgur.com/qIZzeXY

https://imgur.com/a/tum3vqh

View: https://imgur.com/a/tum3vqh

 

[Solblinks]

XMP might be enabled but sometimes a motherboard will ask you to select a profile, did you select it? Try selecting a lower profile and see if it works. Is your RAM voltage 1.35v? typically XMP requires more power to operate. Can you send a picture of the SPD and Memory page on CPU-Z

CPU 5600x seen here https://www.amd.com/en/products/cpu/amd-ryzen-5-5600x
could it be because if u look under "Connectivity " it shows max ram speed 3200. so 5600x cant go over that?? so is this because my ram is to fast for the cpu since my xmp ram is 3600?

 

[Elezondo]

Your ram appears to be running at 2133, try different XMP speed settings until you find something stable.

 

[Elezondo]

Oh, and you can also try running 1 or 2 sticks and seeing if you can hit your target speed. If 2 sticks, still aim for dual channel installation.

 

[Ralston18]

From the RAM link in Post # 7:

"The "Q" in the part number denotes that it can be used in quad systems, but it can be used as dual OR quad channel. Your processor and your motherboard will determine whether it runs on two or four channels. "

Also note the dates on the Q&A's.

My recommendation is to double check the motherboard's documentation with respect to supported RAM, supported RAM installations, and supported RAM configurations.

Also go to the manufacturer's website for current updates and information.