PC Wiring WIFI card?

[sales.ofrip]

So I had to replace my wifi card in mydesktop, and I'm having trouble reconnecting the tiny wires to the card. the gold connectors are still connected. The black and white connectors were pulled out. I tried but couldn't seem to get it to work with those tiny wires.

Thought about just getting new connections that are already connected to gold connectors and just replacing them and then just splice each wire to the other. Any advice would be greatly appreciated. Thanks

 

[kanewolf]

Without a picture, I can't say for sure, but whatever you are describing is not right. You can't splice coax or re-install the wire in the "gold connectors". The description you have made sounds like your WIFI won't work when you are done.

 

[The Paladin]

the antenna connectors are just press into place lay it on top of round connector and press gently down it will click in place.

 

[anis.mohmaed]

The problem is not with the gold antenna connectors, its the black and white wires connected to them have been pulled off and now you can see the tip of the exposed wire. I tried reconnecting to the "gold connector" with no luck.

 

[The Paladin]

ah you broken the antenna wire ends... well no solution short of getting new set
like this set https://www.ebay.com/itm/Pair-of-Internal-Network-Antenna-Wire-for-NGFF-M-2-Dual-Band-Wifi-Wireless-Card/253769889945?epid=20021680479&hash=item3b15dd3899:g:huEAAOSwT9JbVNaR