pc wont boot after upgrading gpu, psu, and case

[dylangiantsfan]

I tried booting my pc after upgrading some of the parts. It doesnt boot and is idle what could I have done wrong.

 

[Necromimesis]

Sounds like a psu issue, possibly doa? Do you have another psu to check and see? Your description is very vague so pinpointing the issue is hard.

 

[dylangiantsfan]

Sounds like a psu issue, possibly doa? Do you have another psu to check and see? Your description is very vague so pinpointing the issue is hard.

I dont have another psu, is there another way to check.

 

[Necromimesis]

Sounds like a psu issue, possibly doa? Do you have another psu to check and see? Your description is very vague so pinpointing the issue is hard.

I dont have another psu, is there another way to check.

well you said you are upgrading the parts meaning replace them? or did the computer not have a psu to begin with? https://www.youtube.com/watch?v=dyVkWznvDHQ
here is a tutorial on how to check if it is doa.

 

[dylangiantsfan]

The psu is tested and works

 

[Necromimesis]

That's odd then as to why it won't post. after plugging it in and attempting to turn it on, are all the fans for the gpu and cpu cooler spinning?

 

[dylangiantsfan]

When i press the power button nothing happens at all.

 

[xfirestormxx]

Have you checked the wires connecting from the power button into the motherboard are inserted correctly with the postives and negatives the correct way around?

Also, is the 4/8 pin CPU plug plugged into the board?
Additionally, is the 24 ATX plug connected?

 

[Necromimesis]

When i press the power button nothing happens at all.

I would say check the connectors for the case buttons and consult the mobo manual as to where they are supposed to go because at least the psu should power up considering you just tested it. Sounding more like a motherboard issue now, is it possible you shorted it out when changing the components?

 

[dylangiantsfan]

Everything is plugged in, imight have the connectors in the wrong place

 

[dylangiantsfan]

I have a am1i mobo, is there a way to check for static damage