Question pc wont boot from any new devices

[schraibfeler]

Hi,

I cloned an hdd to a new ssd and it wont boot, I tried to run an windows installer usb but then it gives me an error.
You cant find the exact same error-screen by typing oxc000000e A required device isn´t connected or can´t be accessed

 

[kerberos_20]

hi, your cloning wasnt done right if it doesnt boot, code u getting means some important system files are missing, this doesnt mean those files are gone, it means BCD (boot loader) doesnt know where those files are and u will need to manualy enter boot paths there

so...disconnect all your drives except your cloned drive (keep connected drive which u want to boot from and has windows on it)
boot from windows installation media
dont click on install now, click on repair this computer, then trooubleshoot -> advanced options -> command prompt
and try this first
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
see if that works, if it still wont boot, go back to command promp and enter those commands
diskpart
list disk
list vol
take picture from it and post it here

 

[schraibfeler]

hi, your cloning wasnt done right if it doesnt boot, code u getting means some important system files are missing, this doesnt mean those files are gone, it means BCD (boot loader) doesnt know where those files are and u will need to manualy enter boot paths there

so...disconnect all your drives except your cloned drive (keep connected drive which u want to boot from and has windows on it)
boot from windows installation media
dont click on install now, click on repair this computer, then trooubleshoot -> advanced options -> command prompt
and try this first
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
see if that works, if it still wont boot, go back to command promp and enter those commands
diskpart
list disk
list vol
take picture from it and post it here

I tried booting from another pc and it worked so it should be working

but i will try doing that

 

[schraibfeler]

After the command scanos the pc says wait and then after 5min or so it crashes

 

[schraibfeler]

hi, your cloning wasnt done right if it doesnt boot, code u getting means some important system files are missing, this doesnt mean those files are gone, it means BCD (boot loader) doesnt know where those files are and u will need to manualy enter boot paths there

so...disconnect all your drives except your cloned drive (keep connected drive which u want to boot from and has windows on it)
boot from windows installation media
dont click on install now, click on repair this computer, then trooubleshoot -> advanced options -> command prompt
and try this first
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
see if that works, if it still wont boot, go back to command promp and enter those commands
diskpart
list disk
list vol
take picture from it and post it here

Ok so disparat doesn’t seem to find the ssd but I can still boot from it. How do I attach an photo I’m very new here