PC won't boot up after new cpu cooler and cpu installation.

[Hexacool]

Hello everyone,
I bought a new Amd a4 860K to replace my a6-7400K. I popped it in along with a new cryorig c7, which was a pain to install by the way, and turned it on. It started up, which sounded good, but then died. I tried putting in the old cpu. Same thing. I have checked the connections to the motherboard and they are all fine. All help is appreciated.

 

[jaredmykal1]

Did you reset the CMOS after changing the CPU each time? (Pull out the little button-cell battery and wait a bit, then re-insert).
Also, what PSU and GPU are you running? The 860k pulls an extra 30w or so, which may have put your PSU over the edge.

 

[13thmonkey]

precise component list please.

 

[Hexacool]

Did you reset the CMOS after changing the CPU each time? (Pull out the little button-cell battery and wait a bit, then re-insert).
Also, what PSU and GPU are you running? The 860k pulls an extra 30w or so, which may have put your PSU over the edge.

I am currently running a 430Watt EVGA bronze 80+

I did not try resetting the cmos! thank you will try that today!

 

[Hexacool]

precise component list please.

Old cpu: Amd a6-7400k 3.5Ghz dual core processor
New cpu: Amd athlon x4 860k 3.7GHz quad core processor
Motherboard: Gigabyte GA-A2A68HM-H
Memory: 8GB DDR3 1600Mhz Team Elite Plus
Storage: 1TB 7200RPM Hitachi Travelstar and 500GB Western Digital Caviar Blue 7200RPM
PSU: EVGA 430W 80+ Bronze
GPU: MSI GTX 1050ti 4GB

 

[Darkinal]

Hello everyone,
I bought a new Amd a4 860K to replace my a6-7400K. I popped it in along with a new cryorig c7, which was a pain to install by the way, and turned it on. It started up, which sounded good, but then died. I tried putting in the old cpu. Same thing. I have checked the connections to the motherboard and they are all fine. All help is appreciated.

I agree with Jared, you probably need a new psu, What wattage is it?

 

[Hexacool]

Hello everyone,
I bought a new Amd a4 860K to replace my a6-7400K. I popped it in along with a new cryorig c7, which was a pain to install by the way, and turned it on. It started up, which sounded good, but then died. I tried putting in the old cpu. Same thing. I have checked the connections to the motherboard and they are all fine. All help is appreciated.

I agree with Jared, you probably need a new psu, What wattage is it?

I have an EVGA 430W Psu Bronze efficiency. I am also running a GeForce gtx 1050 ti. I don't think that the psu is the problem, because when I put the old cpu in it did the same thing.