- Jul 16, 2020
- 1
- 0
- 10
So I recently just cleaned my PC of dust using compressed air, because I was hearing odd noises coming from my gpu and assumed it was the fan getting caught on dust. (Still not sure if that's the case.) The system was working fine before I attempted to clean it, but after the process I found that my system wasn't booting up properly.
The motherboard LEDs light up and the fans all start turning, but my monitor doesn't detect and input from the system at all. The system stays on for about 10 seconds, before shutting itself off and then after a brief pause, it boots itself back up again.
I tried looking around the web for some solutions and tried to reseat the RAM, but it didn't seem to do anything. The one difference after that though, is that now when I try to boot up the system the system just stays on, until I forcibly hold down the power button to shut it off. There is still no bios booting up though. Any ideas on what my issue may be, and some possible solutions? Thank you all for your help, it's greatly appreciated.
The motherboard LEDs light up and the fans all start turning, but my monitor doesn't detect and input from the system at all. The system stays on for about 10 seconds, before shutting itself off and then after a brief pause, it boots itself back up again.
I tried looking around the web for some solutions and tried to reseat the RAM, but it didn't seem to do anything. The one difference after that though, is that now when I try to boot up the system the system just stays on, until I forcibly hold down the power button to shut it off. There is still no bios booting up though. Any ideas on what my issue may be, and some possible solutions? Thank you all for your help, it's greatly appreciated.
Facebook
Twitter
Instagram