PC won't start. "Page_Fault_In_Nonpaged_Area"

Solution
Is the HDD set to AHCI mode in BIOS? Did you supply the AHCI driver, if necessary, during the Windows installation boot process?


The memory showing up in BIOS doesn't prove that the memory is operating without errors.

Test each DIMM using a utility like MemTest86 or Memtest86+.
 


How exactly can I test my ram with these programs? I have no other computers that use DDR3 240Pin. Is it a option in the BIOS?
 


Okay. So, I got memtest86 working. It has run for about 2 and a half hours so far and has reported 0 errors. Could this BSOD be a software or hard drive issue?
 
Okay, so I ran the full test, all four passes. It got zero errors. So that basically rules out the ram. I am guessing I either have a corrupted windows file, (It does say NTFS.sys at the end of the error code) or the hard drive is malfunctioning. Those are the only other possibilities. The CPU is brand new and in 100% working condition so it can't be that. And all of the other parts would give different errors. I am guessing it is most likely a broken windows boot file. If it is, is there any way to clear/reformat my hard drive? Maybe run Ubuntu of a DVD/USB and do it?
 


I already have Windows installed on a DVD. It's gonna take a lot more time. How do I reinstall? When I put the disc in it automatically boots into windows off the disc and crashes. Maybe the copy of windows on the disc is corrupted?
 


Yes it is. However I don't know about the AHCI Driver. I just need to know how to wipe the hard drive and reinstall windows without accessing my PC. Wiping the drive will be easy, as there are iso based utilities.