Hey guys, I really need help here.
While trying to reconnect the front pannel usb3 to usb 2 adapter (while booted into window, I know it was very stupid) I believe I unplugged the boot drive and everything went black and won't turn on. I'm not super sure if this is the issue, or if I managed to damage the PSU. the cables were kind of stuck and I had to pull on them, but these things are pretty thick.
I got the impression that it went off after slightly unplugging the SSD sata cable.
I tried unplugging the psu, pulling the ram out and using the CMOS jumper thing (do I just move the pin cap and wait 5 seconds with everything turned off? that's what I did ).
Any ideas on what the problem is or how to debug this? All fans are spinning, including GPU, but no usb powered devices are lighting up.
While trying to reconnect the front pannel usb3 to usb 2 adapter (while booted into window, I know it was very stupid) I believe I unplugged the boot drive and everything went black and won't turn on. I'm not super sure if this is the issue, or if I managed to damage the PSU. the cables were kind of stuck and I had to pull on them, but these things are pretty thick.
I got the impression that it went off after slightly unplugging the SSD sata cable.
I tried unplugging the psu, pulling the ram out and using the CMOS jumper thing (do I just move the pin cap and wait 5 seconds with everything turned off? that's what I did ).
Any ideas on what the problem is or how to debug this? All fans are spinning, including GPU, but no usb powered devices are lighting up.
Facebook
Twitter
Instagram