[SOLVED] PC won't turn on properly when 32GB RAM installed

[robin_HU]

Howdy Everyone!

Recently i bought a 2x 8GB ram and put it on my already 16GB system. (G.SKILL 16GB KIT DDR4 3200MHz CL16 Trident Z RGB)

After i put all the 32GB to my system the PC won't boot properly.
It will power up but second later power down, and cycle until i power off the PC.

I tried switching the slots, but not much success.
The one on my PC and the new what i bought kit is the same.


Thanks,
Robin
____
CONFIG:
Asus ROG STRIX Z390-E Gaming
Intel i9-9900K
NZXT E850
NZXT Kraken x62
2x8GB G.SKILL DDR4 3200MHz CL16 Trident Z RGB
Samsung 970 evo plus - 250GB
Samsung 970 evo plus - 1 TB
MSI 2080 Gaming x Trio

 

[PrinceTexasLoaf]

Howdy Everyone!

Recently i bought a 2x 8GB ram and put it on my already 16GB system. (G.SKILL 16GB KIT DDR4 3200MHz CL16 Trident Z RGB)

After i put all the 32GB to my system the PC won't boot properly.
It will power up but second later power down, and cycle until i power off the PC.

I tried switching the slots, but not much success.
The one on my PC and the new what i bought kit is the same.


Thanks,
Robin
____
CONFIG:
Asus ROG STRIX Z390-E Gaming
Intel i9-9900K
NZXT E850
NZXT Kraken x62
2x8GB G.SKILL DDR4 3200MHz CL16 Trident Z RGB
Samsung 970 evo plus - 250GB
Samsung 970 evo plus - 1 TB
MSI 2080 Gaming x Trio

Your motherboard will have one of those little flat pancake shaped batteries in it, turn off your computer unplug the power cord, and take out that battery. Put the new ram in and wait 15 minutes then put the battery back and put the power plug back in and turn on your computer then go to your bios and enable 2999mhz xmp. Your cpu's rated for 2666mhz ram but should be able to handle the little extra speed.