Post your Temps here

[ChipDeath]

XP1700+ [t-bred b] @ 2254Mhz (196x11.5), 1.6Vcore
TT Volcano 7+ (on low speed - hair dryer rather than jet engine)

~40 - 44C idle..
~50 - 55C Load. (sandra burn-in)

would try to oc further, but it's not stable when faster, even up to 1.9V, and I don't like pumping that much Voltage thru it..

---
$hit Happens. I just wish it would happen to someone else for a change.

 

[randy66]

1) Xp2500 @ 11x@200 37c idle , 42c load - slk800u/TTSmart fan II
2) Xp2100 t/bred b , 39 idle , 45 load , volcano 9
3) P4 2.53 , 37 idle , 44-46 load , stock cooler
4) T-bird 1.1 , 42 idle , 48-50 load , Falcon Rock
5) celeron 533 (for 4yr old) Dont care bout temp

 

[speeduk]

2500xp (barton) @ 2.3ghz 1.78 volts
Room temp = 32C (insane heatwave here right now)
Case temp = 37C
CPU idle = 47C
Load (prime95) = 52C

When it was a bit cooler yesterday, cpu idled at about 43C and 48 load. Im using the SK7 and 2 smartfans for cooling. Ive only just put the new cpu in so in a weeks time once the AS3 has settled, and once the heatwave passes, will probably idle low 40's.

<A HREF="http://service.futuremark.com/compare?2k1=6790821" target="_new"> MY RIG </A>
<A HREF="http://service.futuremark.com/compare?2k3=1065087" target="_new"> 3D-03 </A>
<font color=red> 120% overclocker </font color=red> (cheapskate)

 

[longhorn2005]

Intel 2.8C 1024MB TTake3 Case

CPU Temp (idle) 21C
CPU Temp (Load) 29C
Room Temp 15C
CASE Temp 19C

 

[Solstice]

Longhorn, Isnt 15c under 60 farenhiet I couldnt sit in a room that cold.

"Bush+Rumsfield=Dictatorship"

 

[HardWareBoss]

So build a bigger case. That way your big 3 foot tall heatsink would fit.

 

[siranthony]

P4 2.4c @ 3.0 stock voltage. Zalman 7000cu Heat sink fan. 30 idle. 31 load. This fan kicks but and is quiet.

 

[Solstice]

Its just Amazing that most of you don't have a bigger swing from Idle to full load. I need to get a new one.

"Bush+Rumsfield=Dictatorship"

 

[DrJeckyl]

P4 2.4B@ 2.8 (vcore=1.65): idle-35/36C, load-39/40C
cooling: volcano 7+ & 4 x 80mm case fans (antec 1040 case, highly modded)


--the Doc

 

[pIII_Man]

don't need one...if i pull the fan off of my current setup...the cpu temp is 55c full load...

If i put my k6 in a Ferrari it would be faster than your your pentium 4 or Athlon XP :tongue:

 

[HardWareBoss]

Nice. So you are pulling your fan off?

 

[pIII_Man]

no i don't mind the noise...so i am leaving it on...it keeps my cpu nice and cool...and that is good especially when you are running the cpu .5 volts over stock voltage...

If i put my k6 in a Ferrari it would be faster than your your pentium 4 or Athlon XP :tongue:

 

[recruit370]

barton 2500 plus swiftec mcx 2.475 ghz temps 45 idel 53 load

ALWAYS AIM LOW SO YOU CAN'T BE DISSAPOINTED

 

[phial]

Athlon Thunderbird 1.2Ghz, using stock hsf. 60-63º idle, 70º full load.

ahahahahah wowwwww

-------

<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new"> I highly recommend you DONT click my signature. Dont say I didnt warn you!1!! </A>

 

[Praesul]

T-Bred 2100+ @ 2.0GHz - 1.60v running 44°C idle and up to 60°C max after hours of heavy load. Stock AMD HSF.

<A HREF="http://forumz.tomshardware.com/modules.php?name=Forums&file=profile&mode=viewprofile&internal=1&username=Praesul" target="_new">My system</A>

 

[vagabond]

AMD XP2400+ @1.99Ghz 55C by SANDRA; 55-57C @BIOS both idle and under load because SETI is always running in the background. Cooler is .<A HREF="http://www.arctic-cooling.com/en/products/copper_silent_tc/" target="_new">Arctic Cooling Copper Silent TC.</A>

<A HREF="http://www.anandtech.com/mysystemrig.html?id=23810" target="_new"><font color=blue>My System </font color=blue></A>
<b><font color=blue>VAGABOND<font color=blue></b>

<b><font color=blue>veni,vidi, and ended up in THGC<font color=blue></b>

 

[Guest]

P4c 2.6 stock cooling
33 idle
45-50 under load

 

[mito]

58C. I believe it's wrong.

My specs:

ecs k7s5a
athlon 1300

Is sisandra wrong?

Please reply. Thanks.


/\/\ito<P ID="edit"><FONT SIZE=-1><EM>Edited by mito on 08/06/03 11:14 PM.</EM></FONT></P>

 

[HardWareBoss]

Oh is that all you could get out of it?

 

[Quetzacoatl]

Bah

AthlonXP 1700+ @ 2.4Ghz 32c Idle, 37c load
Alpha Pal8045t with custom fan wiring for low rpms

I want to see an <font color=blue>Ati Radeon 99999 Ultra Pro</font color=blue>, based on the <font color=red>AtiRage core</font color=red>. And people wonder how a <font color=purple>Geforce3</font color=purple> is better than a <font color=orange>Geforce4 Mx...</font color=orange>

 

[pIII_Man]

after 2.2 volts it won't get into windows...no matter what speed i try it at...at 2.5 volts durring post everything looks funnny...hehe i wounder if i have voided my cpus warantee? running a 1.65 volt cpu at 2.5...that certainly is not kosher...

I really don't care about this chip...i hate it, it won't overclock for $hit!

If i put my k6 in a Ferrari it would be faster than your your pentium 4 or Athlon XP :tongue:

 

[ChipDeath]

running a 1.65 volt cpu at 2.5

Bloody hell! and then..

I really don't care about this chip...i hate it

...LOL no $hit Sherlock, never woulda guessed...
Sounds almost like you're deliberately trying to nuke the poor little thing..

---
The end is nigh.. (For this post at least)

 

[pIII_Man]

Actually i have really started to gain respect for the resilience of the pIII's...It kinda makes me wonder if these "suden death syndromes" are fact or fiction...


I can honestly say that after a certain voltage...even if the cpu is under 40c...voltage does nothing to help your overclock and just makes your cpu unstable...

If i put my k6 in a Ferrari it would be faster than your your pentium 4 or Athlon XP :tongue:

 

[hatimh]

----------------------------------------------------
AthlonXP 1700+ @ 2.4Ghz 32c Idle, 37c load
Alpha Pal8045t with custom fan wiring for low rpms
----------------------------------------------------

Yeah right! Where do you live, Alaska?



-----------------------------------
The bigger I am, the harder they fall.

 

[smitbret]

I had an Athlon 1.4GHz T-bird that would swing from 45c to 61c on a Gigabyte 7DX board. I've since switched cases, boards and processors. Seemed that switching the board and case made more difference than anything.
-Brett

>Its just Amazing that most of you don't have a bigger swing from Idle to full load. I need to get a new one.<