Hi All,
My PC specs are in the signature.
So, I've had some instabilities with the pc intermittently for a while now. Today, all of a sudden the pc crashed and restarted when playing bf1, I go open event viewer right away and the pc freezes, no response but display was there, just frozen, had to turn off power supply to shutdown, turning power supply back on caused the pc to boot loop couple of times and then stuck on DRAM, removed one stick from the 4th slot, worked fine BIOS reset and turning on XMP worked with one stick, so I tried another stick in 4th slot again after resetting bios and clearing CMOS, stuck in either CPU or DRAM LED again, switched ram sticks, both sticks ran fine on 1st slot. My first 3600x failed under similar circumstances in 2022, memory controller issue as far as I could tell. Figured it's happened again and left just one stick in the pc, left for a while and then gave it a shot and plugged the 2nd stick back in 4th slot, guess what it decides to work fine again. XMP is turned on too. I had a similar experiance couple of months ago when I cleaned the cpu cooler when I had to remove the ram sticks, then too it just decided to work randomly.
Also, event viewer shows Dump file creation failed due to error during dump creation before the first crash.
Edit;
Ryzen 5 3600x
MSI B450 Tomoawk Max
Zotac 3070 white
Corsair Vengeance LPX 2x8 3000 Mhz
CM MWE 650W
WD SN550 1 TB
Acer VG240YP
My PC specs are in the signature.
So, I've had some instabilities with the pc intermittently for a while now. Today, all of a sudden the pc crashed and restarted when playing bf1, I go open event viewer right away and the pc freezes, no response but display was there, just frozen, had to turn off power supply to shutdown, turning power supply back on caused the pc to boot loop couple of times and then stuck on DRAM, removed one stick from the 4th slot, worked fine BIOS reset and turning on XMP worked with one stick, so I tried another stick in 4th slot again after resetting bios and clearing CMOS, stuck in either CPU or DRAM LED again, switched ram sticks, both sticks ran fine on 1st slot. My first 3600x failed under similar circumstances in 2022, memory controller issue as far as I could tell. Figured it's happened again and left just one stick in the pc, left for a while and then gave it a shot and plugged the 2nd stick back in 4th slot, guess what it decides to work fine again. XMP is turned on too. I had a similar experiance couple of months ago when I cleaned the cpu cooler when I had to remove the ram sticks, then too it just decided to work randomly.
Also, event viewer shows Dump file creation failed due to error during dump creation before the first crash.
Edit;
Ryzen 5 3600x
MSI B450 Tomoawk Max
Zotac 3070 white
Corsair Vengeance LPX 2x8 3000 Mhz
CM MWE 650W
WD SN550 1 TB
Acer VG240YP
Last edited by a moderator: