Hi,
I have recently upgraded my PC as cheaply as i could but i'm worried about the amount of amps on my 12v rails.
This is a link to the PSU http://www.silentpcreview.com/article610-page1.html. Its a Enermax EG701AX-VE(W)SFMA V2.0 600 Watt PSU
It probably was a good PSU in its day but I bought it without realising how old it was and how low the amps are on the rails.... Dumb I know but i'm new to this....
So my question is will it run a 550ti? The requirements on the box say minimum of 400w and 24 amp on 12v rail.
But obviously I only have 22 amp and the 550ti only has one 6 pin connector.
Would it be better to get one of these connectors http://www.maplin.co.uk/pci-express-power-converter-46857 to plug into the graphics card? Does that mean it will be a total of 44 amps? Not entirely sure how these things work. Or should i just run it off the 6 pin connector that comes out of the psu?
Any advice would be much appreciated.
I have recently upgraded my PC as cheaply as i could but i'm worried about the amount of amps on my 12v rails.
This is a link to the PSU http://www.silentpcreview.com/article610-page1.html. Its a Enermax EG701AX-VE(W)SFMA V2.0 600 Watt PSU
It probably was a good PSU in its day but I bought it without realising how old it was and how low the amps are on the rails.... Dumb I know but i'm new to this....
So my question is will it run a 550ti? The requirements on the box say minimum of 400w and 24 amp on 12v rail.
But obviously I only have 22 amp and the 550ti only has one 6 pin connector.
Would it be better to get one of these connectors http://www.maplin.co.uk/pci-express-power-converter-46857 to plug into the graphics card? Does that mean it will be a total of 44 amps? Not entirely sure how these things work. Or should i just run it off the 6 pin connector that comes out of the psu?
Any advice would be much appreciated.