Powwer wire

[cbrady1000]

Hello,
I need to know what pins to plug my power wires into the mother board down in the right coener . There is a groupe of 7 pins . which 2 does the power wire (red and white ) do I plug it into . thanks

 

[PreferLinux]

It should be on the motherboard, but is probably barely readable. You might have what they call "Q-connector" where you plug in the power button switch and such into a small connector, which you then plug into the motherboard (on those pins). I suggest you look in the manual. You can download it off their website if needed.

 

[Akashdeep]

Hello,
I need to know what pins to plug my power wires into the mother board down in the right coener . There is a groupe of 7 pins . which 2 does the power wire (red and white ) do I plug it into . thanks

Yes there it is. Just ensure the + & - properly.

Note: Before you plug, you might test the Mobo with a Needle by touching the both pins.

 

[PreferLinux]

The polarity (+/-) shouldn't matter for the power switch.

 

[Akashdeep]

The polarity (+/-) shouldn't matter for the power switch.

Might not for some, but for some yes it is.

 

[PreferLinux]

As in the case switch isn't just a switch, and therefore requires it to be one way around? I guess that is occasionally the case.

 

[delluser1]

As in the case switch isn't just a switch, and therefore requires it to be one way around? I guess that is occasionally the case.

Never heard of a switch on a computer that was more than a switch.
It's getting tougher and tougher to get it thru to some people, so I'm going to repeat what you already posted, with a little change

The polarity (+/-) doesn't matter for the power switch.

Might not for some, but for some yes it is.

No, not for any of them.

 

[delluser1]

Hello,
I need to know what pins to plug my power wires into the mother board down in the right coener . There is a groupe of 7 pins . which 2 does the power wire (red and white ) do I plug it into . thanks

We need more information, the make and model of your motherboard