Problem with IBM Netfinity 3000

[Guest]

Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)

Hi

This is Abhi here. I am facing a problem with IBM Netfinity 300 server,
I have attached 1 IDE and a SCSI hard drive, win2k server is installed
on SCSI. I want to boot the server by using SCSI after attaching both
hdds. It is not allowing me to boot. By default it is trying to boot
through IDE. I tryed out all settings in BIOS setup. though the problem
is not solved.
please advise me for the same

Thanks
Abhijit

 

[Guest]

Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)

HI Abhi,

once IDE HDD is installed this will make it as your HDD0 in the BIOS.
On the startup sequence, try to change HDD0 into HDD1 instead.



Abhijit wrote:
> Hi
>
> This is Abhi here. I am facing a problem with IBM Netfinity 300
server,
> I have attached 1 IDE and a SCSI hard drive, win2k server is
installed
> on SCSI. I want to boot the server by using SCSI after attaching both
> hdds. It is not allowing me to boot. By default it is trying to boot
> through IDE. I tryed out all settings in BIOS setup. though the
problem
> is not solved.
> please advise me for the same
>
> Thanks
> Abhijit

 

[Guest]

Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)

I have checkedthat still it didn work
Any one have latest bios updates of netfinity3000?
please mail me