Problem with monitor or graphic card

[Guest]

Archived from groups: alt.comp.periphs.videocards.nvidia (More info?)

Hi,
I have a computer equipped with a nvidia GeForce4 Ti 4600 graphic card
and an LG 901B monitor.

The other day when I tried to start up my computer the picture looked
I little
bit strange with stripes and a little bit of flickering. The computer
started up ok first. The bios loaded but when it tried to load xp the
screen went black and went into standby mode.

I started up the computer again and pressed F8 to start it in VGA
mode. It
started up although the picture is still striped, and as soon as I
tried to
change (via the control panel) anything with the resolution (it was
really low) the screen went into standbymode again.

I started it up again in failsafe mode and it started ok (still
distorted picture). I could jack up the resolution to 768x1024, 32 bit
color,
and things look kind of normal (except the stripes).
If I disable the graphic card I can startup the computer normally
next time, but things don't look totally ok.

I don't know If it's my monitor thats broken or if it's the graphics
card.
I didn't do anything special before the problems occured, and I have
since
tried to install new drivers for the graphic card and the monitor, but
no
change.

Is there any way I can check my card? any utility? Or is it the
monitor?

Help appreciated!

//Gustav

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.nvidia (More info?)

check also the mainboard
read my earlier post...!

--
F r e e
"Gustav" <gfyring@kth.se> escribió en el mensaje news:8317a2d7.0404010528.85bb49@posting.google.com...
> Hi,
> I have a computer equipped with a nvidia GeForce4 Ti 4600 graphic card
> and an LG 901B monitor.
>
> The other day when I tried to start up my computer the picture looked
> I little
> bit strange with stripes and a little bit of flickering. The computer
> started up ok first. The bios loaded but when it tried to load xp the
> screen went black and went into standby mode.
>
> I started up the computer again and pressed F8 to start it in VGA
> mode. It
> started up although the picture is still striped, and as soon as I
> tried to
> change (via the control panel) anything with the resolution (it was
> really low) the screen went into standbymode again.
>
> I started it up again in failsafe mode and it started ok (still
> distorted picture). I could jack up the resolution to 768x1024, 32 bit
> color,
> and things look kind of normal (except the stripes).
> If I disable the graphic card I can startup the computer normally
> next time, but things don't look totally ok.
>
> I don't know If it's my monitor thats broken or if it's the graphics
> card.
> I didn't do anything special before the problems occured, and I have
> since
> tried to install new drivers for the graphic card and the monitor, but
> no
> change.
>
> Is there any way I can check my card? any utility? Or is it the
> monitor?
>
> Help appreciated!
>
> //Gustav

 

[Andy]

Archived from groups: alt.comp.periphs.videocards.nvidia (More info?)

I had a very similar problem that i cured by removing the graphics card and
removing about a ton of dust from the fans !!

Andy
"F r e e" <free@spam.nothanx> wrote in message
news:6PUac.1489$9c.172022@news.ono.com...
check also the mainboard
read my earlier post...!

--
F r e e
"Gustav" <gfyring@kth.se> escribió en el mensaje
news:8317a2d7.0404010528.85bb49@posting.google.com...
> Hi,
> I have a computer equipped with a nvidia GeForce4 Ti 4600 graphic card
> and an LG 901B monitor.
>
> The other day when I tried to start up my computer the picture looked
> I little
> bit strange with stripes and a little bit of flickering. The computer
> started up ok first. The bios loaded but when it tried to load xp the
> screen went black and went into standby mode.
>
> I started up the computer again and pressed F8 to start it in VGA
> mode. It
> started up although the picture is still striped, and as soon as I
> tried to
> change (via the control panel) anything with the resolution (it was
> really low) the screen went into standbymode again.
>
> I started it up again in failsafe mode and it started ok (still
> distorted picture). I could jack up the resolution to 768x1024, 32 bit
> color,
> and things look kind of normal (except the stripes).
> If I disable the graphic card I can startup the computer normally
> next time, but things don't look totally ok.
>
> I don't know If it's my monitor thats broken or if it's the graphics
> card.
> I didn't do anything special before the problems occured, and I have
> since
> tried to install new drivers for the graphic card and the monitor, but
> no
> change.
>
> Is there any way I can check my card? any utility? Or is it the
> monitor?
>
> Help appreciated!
>
> //Gustav


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.594 / Virus Database: 377 - Release Date: 24/02/2004

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.nvidia (More info?)

I have the same problem and I have FX5900 and Samsung 959NF monitor. Whole
comp is new so there cannot be any dust causing the graphic card to
overheat... Still trying to solve the problem... What is the rest of your
configuration? Maybe some other part causes this..


"andy" <andy@bravelink.com> wrote in message
news:106qtmnhm5fh5b@corp.supernews.com...
> I had a very similar problem that i cured by removing the graphics card
and
> removing about a ton of dust from the fans !!
>
> Andy
> "F r e e" <free@spam.nothanx> wrote in message
> news:6PUac.1489$9c.172022@news.ono.com...
> check also the mainboard
> read my earlier post...!
>
> --
> F r e e
> "Gustav" <gfyring@kth.se> escribió en el mensaje
> news:8317a2d7.0404010528.85bb49@posting.google.com...
> > Hi,
> > I have a computer equipped with a nvidia GeForce4 Ti 4600 graphic card
> > and an LG 901B monitor.
> >
> > The other day when I tried to start up my computer the picture looked
> > I little
> > bit strange with stripes and a little bit of flickering. The computer
> > started up ok first. The bios loaded but when it tried to load xp the
> > screen went black and went into standby mode.
> >
> > I started up the computer again and pressed F8 to start it in VGA
> > mode. It
> > started up although the picture is still striped, and as soon as I
> > tried to
> > change (via the control panel) anything with the resolution (it was
> > really low) the screen went into standbymode again.
> >
> > I started it up again in failsafe mode and it started ok (still
> > distorted picture). I could jack up the resolution to 768x1024, 32 bit
> > color,
> > and things look kind of normal (except the stripes).
> > If I disable the graphic card I can startup the computer normally
> > next time, but things don't look totally ok.
> >
> > I don't know If it's my monitor thats broken or if it's the graphics
> > card.
> > I didn't do anything special before the problems occured, and I have
> > since
> > tried to install new drivers for the graphic card and the monitor, but
> > no
> > change.
> >
> > Is there any way I can check my card? any utility? Or is it the
> > monitor?
> >
> > Help appreciated!
> >
> > //Gustav
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.594 / Virus Database: 377 - Release Date: 24/02/2004
>
>