PSU for a blade server mobo in a HAF 915r

[Prizm256]

I'm building a new dual xeon X5650 system with a blade server motherboard in the HAF 915r. Everything works out, however the power supply connectors are not standard. I'm looking at either the Supermicro X8DTT-F or the Asus Z8PH-D12/IFB

Both motherboards have two 20-pin power connectors instead of a 24-pin and the two 8-pins that dual Xeons require.

My question is: What power supply could I use that would screw into a standard ATX PSU mounting bracket that has two 20-pin connectors? Preferably one that isn't an super loud server unit and one that has at least 650 watts.

Thank you!

 

[bistwo]

20 Pin connectors are compatible with 24 pin power supplies. 4 pins on one end will just hang over the edge of the connector.

 

[Prizm256]

20 Pin connectors are compatible with 24 pin power supplies. 4 pins on one end will just hang over the edge of the connector.

I specifically need a power supply two 20-pin connectors, the wiring for blade server motherboards is entirely different than wiring on standard ATX boards, and using something like a normal 24-pin ATX power supply with a splitter would likely cause a short

 

[Jared_Waldron]

buy a real PC scrublord

 

[pringleman]

Was this solved. Did you hack a PSU together- Got a similar Sever design I'm working on.