Question about Size compatibility

[MattMayhem]

Hi, I'm new to PC building, and I just had a quick question.

This will be my first PC build soon, and I want to make sure all the parts fit in my case & with my motherboard & what not.

Here's My Build

The thing I'm currently worried about is, if everything will fit in my case? It's an ATX Mid-Tower case, and the MoBo is an ATX.

I know the MoBo will fit, but I get paranoid about things like the GPU and the RAM & the PSU & such.

So, I was hoping one of you experts out there could assure me that all my components will all fit in the case?

Thank you very much for your time, in advance

 

[cin19]

They will fit in the case. But you need move the RAMs into the 2nd/4th slots, if you have the aftermarket cooler becasue the RAM heat spreader.
And here is from the NZXT " VGA Clearance Maximum 230mm w/ hard drive, 330mm w/o hard drive ", and the card size is L=297mm W=132mm H=43mm. Then means you can't install the HDD in HDD bay slot, which is in front of the GPU.

 

[MattMayhem]

They will fit in the case. But you need move the RAMs into the 2nd/4th slots, if you have the aftermarket cooler becasue the RAM heat spreader.
And here is from the NZXT " VGA Clearance Maximum 230mm w/ hard drive, 330mm w/o hard drive ", and the card size is L=297mm W=132mm H=43mm. Then means you can't install the HDD in HDD bay slot, which is in front of the GPU.

Thank you very much, just so I'm clear on this:

I CAN install the HDD AND the GPU, but I cannot install the HDD in the drive bay closest to the GPU?

So, like if I install the HDD in a drive bay that is closer to the top of the case or something, I should be fine?

 

[cin19]

yes.

 

[MattMayhem]

yes.

Alright, thank you VERY much that was a load off my mind, very helpful, I appreciate it 😀