Question R6E Omega not showing 1 of 2 m.2 for RAID setup ?

digitalraven

Distinguished
Feb 29, 2008
81
0
18,630
I finally powered on this PC for the first time with the following: (had these parts sitting around for a few years)

Rampage VI Extreme Omega
10980XE
64GB DDR4 Trident Royal Mem
2x M.2 980 Pro 1Tb inserted into M2_1 & M2_2

First thing i did before powering on was a bios update to latest release using flash button on back.

I wanted to configure RAID next and i may be doing something wrong here.

When i hit F11 EZ Tuning Wizard, i select PCH RAID, computer reboots and then i can only see 1 drive available to me to raid.
When i go back to AHCI mode, i can see both drives under 'Advanced\NVMe controller and Drive Information'

Did i miss a setting to turn on for both to be recognized in RAID?

I see an option under 'Advanced\CPU Storage Configuration'

DIMM.2, M.2_2 and U.2 currently disabled but looks to be for VROC CPU RAID only?
 
So this board does not support PCH raid with M.2_1 & M.2_2 slots? I was able to get both recognized in BIOS but Intel RST does not show both to configure raid. Only shows M.2_1 SSD. Tried playing with CSM settings but no change.
 
So this board does not support PCH raid with M.2_1 & M.2_2 slots? I was able to get both recognized in BIOS but Intel RST does not show both to configure raid. Only shows M.2_1 SSD. Tried playing with CSM settings but no change.

Supposedly it supports various RAID levels.

But IRST seems to only speak to the single chipset M.2 port.