R9 Fury won't POST

[ShockInfantry]

I know it is my new Fury card is the reason my system is not POSTing as when I took it out the system started fine again as normal, as well as when I put in my old 7950 it worked as well. The fans on the Fury spun even if it didn't POST, however.

Is there anything that I could be doing wrong that causing the card not to POST? I'm sure I have both 8 pin connectors plugged in. Otherwise, I am thinking of ordering a replacement.

Operating System
Windows 10 Home 64-bit
CPU
Intel Core i7 3770K @ 3.50GHz
Ivy Bridge 22nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 667MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co. Ltd. Z77-D3H (Intel Core i7-3770K CPU @ 3.50GHz)
Graphics
DVI (1920x1200@60Hz)
3072MB ATI AMD Radeon HD 7900 Series (XFX Pine Group)
PSU
EVGA 750 B2

 

[ShockInfantry]

I guess I better just order a replacement then. Hopefully, this is just an isolated incident.

 

[John Chesterfield]

You may need to upgrade your BIOS to get the Fury to work.

 

[ShockInfantry]

Are you saying I need to update my MB BIOS to get it to work? I took a look at Gigabyte's page, but it doesn't seem like any of the updates addresses GPU compatibility...

http://www.gigabyte.com/products/product-page.aspx?pid=4327#

 

[John Chesterfield]

Yes, you may need to. A lot of older boards need that before they'll run newer cards. It's certainly worth a try.

 

[ShockInfantry]

I found the fix for it, I changed my Bois "PCI ROM PRIORITY" to LEGACY ROM from EFI Compatibility. The card is running fine now. Strange though that a new card can only run on a Legacy thing, though.

Thanks for the help anyways!