Radeon Strix RX 560 Video card

abhishes

Honorable
Apr 23, 2013
34
0
10,540
Hello, I am assembling a PC for the first time. I am watching videos on youtube to figure things out.

I have this graphics card

https://www.newegg.com/Product/Product.aspx?Item=N82E16814126204

The videos say that I should take the PCI Express power cord (it has 6 + 2 pins) and put in the the graphics card.

However I cannot find any place on this card where either 6 or 8 pins can be placed. At the back I see 3 pins. but no 6 or 8

Has anyone used this.... where do I put the pci express cable from the power supply?
 
It uses single 6-pin connection. See the picture below - just where the heat pipe ends in the lowest part of picture.
FfcHyAwFQo4Qcquc_setting_000_1_90_end_1000.png
 
OK. I think I got a defective piece from the factory. I will need to return it. The diagram on their website clearly shows the power pins.

https://www.asus.com/us/Graphics-Cards/ROG-STRIX-RX560-4G-GAMING/

But mine one has the connector missing.
 
This is the photo of the sticker on the side

https://imgur.com/WD0oXrI

I also went to the shop and they did not have the RX560 in stock. but they did have a 4GB RX550 and guess what we opened the box and even that did not have the 6 pin. So at this point I am not sure whether I should return this or not.