Radiators on all air vents?

[pacci524]

I have a Cooler Master Masterbox Lite 3.1 which has 2 120mm fans or 240mm radiator slots, and 1 120mm fan slot on the back. Now, my cpu is being cooled by a Corsair H60 liquid cooler that has a 120mm radiator installed to the back of the case, now im planning to liquid cool my GPU(Gtx 1080) using IDCooling Frostflow 240G AIO liquid cooler for GPU, which I will have to install on the front of the case, this means all my case fan slots will be mounting a radiator, is this a good idea? or should I buy a better case?

 

[Gam3r01]

You are going to see some pretty high temps on the H60, youll be dumping all the 240mms heat into the case.
Is there a reason you plan to cool your gpu with an AIO? Its almost never (being generous) worth the money or time to go that route.

 

[pacci524]

You are going to see some pretty high temps on the H60, youll be dumping all the 240mms heat into the case.
Is there a reason you plan to cool your gpu with an AIO? Its almost never (being generous) worth the money or time to go that route.

I want to overclock my card without having high temps,
The current card I have which is a Galax 1080 Exoc is reaching 83c max under load in most games I play, without overclock.

I was also planning on using a NZXT G12 bracket paired with a AIO that has 120mm radiator so that I could have at least one free fan slot for intake

 

[Gam3r01]

Youre going to end up spending over 100 bucks on cooling that will only net you a few FPS in the long run.
Personally, I would invest the money in something more substantial. SSD, more RAM, etc.

 

[mischon123]

Running a H60 and a total of 6 fans in an Air240. Make sure that the pull side (backside), exhaust has more fancapacity to pull the heat out if that is how your case is built. The Air 240 runs the PS in a separate compartment and does not add heat to the MB side which has a large top, rear and front vent 1800x/1080/SSD/32GB run cool and I live in a hot climate and no AC. I run them at roughly halfspeed (seems to be a sweetspot for the soft blades) and my rig is silent. Its 20$ extra for a much longer life of the whole kit.